The John Deere 2855N is 65 in wide and 59 in tall, with a 84 in wheelbase.
Width65 in (5 ft 5 in) / 1,651 mm
Height59 in (4 ft 11 in) / 1,498.6 mm
Wheelbase84 in (7 ft 0 in) / 2,133.6 mm
John Deere 2855N Dimensions
Overall width
65 in (5 ft 5 in) / 1,651 mm
Overall height
59 in (4 ft 11 in) / 1,498.6 mm
Wheelbase
84 in (7 ft 0 in) / 2,133.6 mm
Tractor Size Comparison Chart
Overall width comparison
This model
65 in
Average
64.6 in
Low
20 in
High
144 in
Overall height comparison
This model
59 in
Average
86.2 in
Low
39.8 in
High
152 in
Wheelbase comparison
This model
84 in
Average
79.2 in
Low
34.8 in
High
190.5 in
John Deere 2855N Extra Dimension Notes
Storage fit note
Storage-wise, the John Deere 2855N is in the smaller end of tractor sizing. With width 65 in (5 ft 5 in) / 1,651 mm and height 59 in (4 ft 11 in) / 1,498.6 mm, standard-style storage may be possible, but attachments can change the answer.
Fitment note
The John Deere 2855N dimensions give width at 65 in (5 ft 5 in) / 1,651 mm and height at 59 in (4 ft 11 in) / 1,498.6 mm. This is the basic answer for whether it fits in your shed, barn or trailer space.
Wheelbase note
The John Deere 2855N lists 84 in (7 ft 0 in) / 2,133.6 mm wheelbase, which is useful when judging stability and storage length.
Storage Tips
The John Deere 2855N is one of the easier tractor sizes to store, but a loader, mower deck or canopy can quickly change the fit.
If the tractor is stored with a loader or rear implement, add more bay depth than the bare length suggests.
Longer wheelbase machines are easier to store when the door approach is straight and uncluttered.
Storage FAQ
Will it fit in a garage?
For storage fit, the useful question is whether the space clears 59 in height, 65 in width and length not captured length with margin. Around 8 ft high and 10 ft wide is the no-drama check.
What size door should I check?
Start with the hard numbers: 59 in high, 65 in wide and length not captured long. Then step up to a practical storage target of about 8 ft high and 10 ft wide.
Do attachments change the storage size?
Yes. Treat length not captured as the bare length only. If front or rear gear stays fitted, add roughly 8 ft to 15 ft to the depth check before trusting the fit.
How much maneuvering room should I allow?
For easier parking, keep the final approach straight and clear. With a 84 in wheelbase and 65 in width, tight offset entries are where damage happens.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
