Weight summary
The published Case IH Farmall 110N weight is 5,498–6,292 lb (2,493–2,854 kg). The primary figure used for comparisons is 5,772 lb (2,618 kg), listed as 2WD ROPS. The published configurations span 794 lb, a 14.4% difference from the lightest listed setup.
How this weight compares
Vineyard Tractor peers · 53 tractors in the benchmark.
Heavy
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
Tractor profile
Model information
| Manufacturer | Case IH |
|---|---|
| Model | Farmall 110N |
| Category | Farm tractor |
| Model years | 2017 – |
| Tractor type | Vineyard Tractor |
| Published weight variants | 4 |
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
| Weight type | Configuration | Weight | Metric | US tons | Variant / note |
|---|---|---|---|---|---|
| 2WD ROPS | — | 5,772 lb | 2,618 kg | 2.89 | — |
| 2WD Cab | — | 5,498 lb | 2,493 kg | 2.75 | — |
| 4WD ROPS | — | 6,292 lb | 2,854 kg | 3.15 | — |
| 4WD Cab | — | 6,085 lb | 2,760 kg | 3.04 | — |
How configuration changes the weight
Technical details
Dimensions
Power & weight ratios
Transport snapshot
Weight context
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
- Case IH Farmall 100N (5772 lb)
- John Deere 1520 (5770 lb)
- Case IH Farmall 65C (5776 lb)
- Case IH Farmall 75C (5776 lb)
- New Holland T4020 (5776 lb)
Closest comparable tractors
- Case IH Farmall 105N (5820 lb, 106 hp)
- Case IH Farmall 110V (5580 lb, 106 hp)
- Case IH Farmall 100N (5772 lb, 98 hp)
- John Deere 5100GN (5566 lb, 100 hp)
- Case IH Farmall 95N (5820 lb, 95 hp)
Case IH Farmall 110N weight FAQ
How much does a Case IH Farmall 110N weigh?
The Case IH Farmall 110N weighs 5,772 lb (2,618 kg) using the published 2WD ROPS figure. Across the published configurations on this page, weight ranges from 5,498 to 6,292 lb (2,493 to 2,854 kg).
How much heavier is the 4WD Case IH Farmall 110N than the 2WD model?
Published 2WD weight is 5,498–5,772 lb (2,494–2,618 kg), while published 4WD weight is 6,085–6,292 lb (2,760–2,854 kg). On a midpoint basis, the published 4WD configurations are about 554 lb heavier. Tires, transmission and other configuration differences can also affect the number.
Is the Case IH Farmall 110N a heavy vineyard tractor?
Yes. The representative figure sits at about the 81st percentile, heavier than roughly 81% of the vineyard tractor peers. That puts it in the heavy range for this comparison. It is 784 lb heavier than the peer-group average of 4,988 lb.
How wide is the Case IH Farmall 110N for transport?
The maximum published tractor width is 52.9 in (4.4 ft). That is 49.1 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the Case IH Farmall 110N weight-to-horsepower ratio?
Using the page’s representative 5,772 lb weight and 106 hp power figure, the tractor carries about 54.5 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.
How many tons does the Case IH Farmall 110N weigh?
The representative published weight is about 2.89 US tons, while the full published range is 2.75–3.15 US tons. Loaded transport weight can be higher than the tractor specification.
