The John Deere 2850 is 81.4 in wide and 100.3 in tall, with a 89.2 in wheelbase.
Width81.4 in (6 ft 9.4 in) / 2,067.6 mm
Height100.3 in (8 ft 4.3 in) / 2,547.6 mm
Wheelbase89.2 in (7 ft 5.2 in) / 2,265.7 mm
Ground clearance26.5 in (2 ft 2.5 in) / 673.1 mm
John Deere 2850 Dimensions
Overall width
81.4 in (6 ft 9.4 in) / 2,067.6 mm
Overall height
100.3 in (8 ft 4.3 in) / 2,547.6 mm
Wheelbase
89.2 in (7 ft 5.2 in) / 2,265.7 mm
Ground clearance
26.5 in (2 ft 2.5 in) / 673.1 mm
Tractor Size Comparison Chart
Overall width comparison
This model
81.4 in
Average
64.6 in
Low
20 in
High
144 in
Overall height comparison
This model
100.3 in
Average
86.2 in
Low
39.8 in
High
152 in
Wheelbase comparison
This model
89.2 in
Average
79.2 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
26.5 in
Average
16.4 in
Low
3.5 in
High
65.4 in
John Deere 2850 Extra Dimension Notes
Storage fit note
For storage, the John Deere 2850 is more tall-garage or small-shed territory. With width 81.4 in (6 ft 9.4 in) / 2,067.6 mm and height 100.3 in (8 ft 4.3 in) / 2,547.6 mm, a normal low garage may be tight.
Wheelbase note
A 89.2 in (7 ft 5.2 in) / 2,265.7 mm wheelbase on the John Deere 2850 helps explain its stance. Wheelbase is one of the better stability comparison numbers.
Ground clearance note
The John Deere 2850 ground clearance comes in at 26.5 in (2 ft 2.5 in) / 673.1 mm. It gives useful context for rougher property work.
Storage Tips
Use a tall garage, barn bay or small machinery shed as the first storage check for the John Deere 2850.
Use the bare dimensions only as a starting point; a practical storage target is 12 ft high and 12 ft wide.
The John Deere 2850 should be treated as broadacre-sized machinery for storage planning.
Wheelbase is 89.2 in, so leave room to line it up cleanly rather than forcing it through a tight angle.
For taller tractors, a door that looks close is not good enough – measure it.
Storage FAQ
Will it fit in a garage?
The tractor itself is 81.4 in wide, 100.3 in tall, and 89.2 in wheelbase. For storage, that means the opening should be closer to 12 ft high and 12 ft wide, with about the tractor length plus attachment room of usable depth.
What size door should I check?
Do not size the door to exactly 100.3 in by 81.4 in. For this model, use about 12 ft height and 12 ft width, then allow the tractor length plus attachment room depth for the length not captured tractor length.
Do attachments change the storage size?
Yes. The John Deere 2850’s 81.4 in width and 100.3 in height are the starting point, but a mower deck can increase width and a loader or rear implement can increase length.
How much maneuvering room should I allow?
A door sized around 12 ft is only useful if the tractor can enter square. The John Deere 2850’s 89.2 in wheelbase means the approach path matters as much as the opening.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
