The John Deere 2040 tractor hydraulic pump flow is 13.5 GPM, and hydraulic system pressure is 2,250 psi.
Hydraulic pump flow13.5 GPM
Implement flow12.4 GPM
Total hydraulic flow12.4 GPM
Hydraulic pressure2,250 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity14.5 gal
John Deere 2040 Hydraulic Flow Details
Hydraulic pump flow
13.5 GPM
Implement hydraulic flow
12.4 GPM
Total hydraulic flow
12.4 GPM
Hydraulic system pressure
2,250 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
14.5 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
13.5 GPM
Average
13.4 GPM
Low
0.9 GPM
High
85 GPM
Implement hydraulic flow comparison
This model
12.4 GPM
Average
11.1 GPM
Low
0.9 GPM
High
78 GPM
Total hydraulic flow comparison
This model
12.4 GPM
Average
13 GPM
Low
0.9 GPM
High
78 GPM
Hydraulic pressure comparison
This model
2,250 psi
Average
1,813.3 psi
Low
300 psi
High
3,000 psi
Hydraulic fluid capacity comparison
This model
14.5 gal
Average
3.6 gal
Low
0.5 gal
High
60 gal
John Deere 2040 Extra Hydraulic Notes
Hydraulic flow note
With about 12.4 GPM implement flow, the John Deere 2040 sits in the compact / utility hydraulic range and is best suited to normal loader use, small hydraulic implements and general utility work.
Hydraulic pressure note
At 2,250 psi, the John Deere 2040’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (12.4 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere 2040 uses a open-center hydraulic setup, so compatibility depends on both the attachment and valve configuration.
Hydraulic fluid capacity note
The John Deere 2040’s hydraulic fluid capacity is listed as 14.5 gal; check the operator manual before servicing because capacity can change with transmission, hydraulic options and market.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
