The John Deere 818 tractor hydraulic pump flow is 30 GPM, and hydraulic system pressure is 1,500 psi.
Hydraulic pump flow30 GPM
Implement flow33.5 GPM
Total hydraulic flow33.5 GPM
Hydraulic pressure1,500 psi
Hydraulic system typeclosed-center pressure-flow compensated
Hydraulic fluid capacity10.6 gal
John Deere 818 Hydraulic Flow Details
Hydraulic pump flow
30 GPM
Implement hydraulic flow
33.5 GPM
Total hydraulic flow
33.5 GPM
Hydraulic system pressure
1,500 psi
Hydraulic system type
closed-center pressure-flow compensated
Hydraulic fluid capacity
10.6 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
30 GPM
Average
13.4 GPM
Low
0.9 GPM
High
85 GPM
Implement hydraulic flow comparison
This model
33.5 GPM
Average
11.1 GPM
Low
0.9 GPM
High
78 GPM
Total hydraulic flow comparison
This model
33.5 GPM
Average
13 GPM
Low
0.9 GPM
High
78 GPM
Hydraulic pressure comparison
This model
1,500 psi
Average
1,813.3 psi
Low
300 psi
High
3,000 psi
Hydraulic fluid capacity comparison
This model
10.6 gal
Average
3.6 gal
Low
0.5 gal
High
60 gal
John Deere 818 Extra Hydraulic Notes
Hydraulic flow note
For hydraulic work, the key number on the John Deere 818 is 33.5 GPM implement flow; that points toward multiple SCVs, larger implements and heavier hydraulic demand.
Hydraulic pressure note
Hydraulic pressure on the John Deere 818 is 1,500 psi, but hydraulic performance depends on pressure and flow together.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (33.5 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
System type matters on the John Deere 818: closed-center pressure-flow compensated affects how hydraulic flow and pressure are delivered to valves and implements.
Hydraulic fluid capacity note
The John Deere 818’s hydraulic fluid capacity is listed as 10.6 gal; check the operator manual before servicing because capacity can change with transmission, hydraulic options and market.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
