The Case IH 4210 specifications include engine power rated at 72 hp (53.7 kW), transmission options including synchromesh, shuttle, partial power shift, or synchromesh creeper and a listed weight of 6,327 to 7,085 lbs.
Case IH 4210 key specifications
| Engine power |
72 hp (53.7 kW) |
| PTO power |
62 hp (46.2 kW) |
| Displacement |
239 cu in (3.9 L) |
| Transmission |
synchromesh, shuttle, partial power shift, or synchromesh creeper |
| Weight |
6,327 to 7,085 lbs |
| Rear PTO |
independent |
Case IH 4210 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power72 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power62 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement3.9 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity29.6 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight7,085 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
This model Industry average
Case IH 4210 power chart
Compare the available engine, PTO and drawbar power ratings.
Tested drawbar power52.9 hp
Case IH 4210 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity112 L
Engine specifications
| Rated RPM |
2,400 |
| Air cleaner |
dry |
| Pre-heating |
thermostart (optional) |
| Oil capacity |
10.4 qt (9.8 L) |
| Coolant capacity |
14.5 qt (13.7 L) |
| Starter volts |
12 |
| Net engine power |
68 hp (50.7 kW) |
| Oil change |
200 h |
Transmission options
| Gear options |
8 forward and 4 reverse, 8 forward and reverse, or 16 forward and 8 reverse |
PTO and hitch
| Drawbar (tested) |
52.90 hp (39.4 kW) |
| PTO (tested) |
61.02 hp (45.5 kW) |
| Rear hitch category |
Category II |
| Hitch control |
draft and position control |
| Rear lift |
3,665 lbs (1,662 kg) |
| Rear PTO speed |
540 rpm, 1.375-inch shaft |
| PTO engine speed |
540 PTO rpm at 2,140 engine rpm |
Hydraulics
| Hydraulic type |
open center |
| Hydraulic pressure |
2,500 psi (172.4 bar) |
| Valves |
0 to 3 |
| Total flow |
16.1 gpm (60.9 L/min) |
Capacities
| ROPS fuel capacity |
20 gal (75.7 L) |
| Cab fuel capacity |
29.6 gal (112.0 L) |
Mechanical specifications
| Clutch |
hydraulic wet disc |
| Final drives |
planetary |
| ROPS Differential lock |
mechanical |
| Cab Differential lock |
electro-hydraulic |
Electrical specifications
| Electrical ground |
negative |
| Charging system |
alternator |
| Charging amps |
45 |
| Battery CCA |
650 |
| Battery volts |
12 |
Dimensions and weight
| ROPS Max capacity |
10,150 lbs (4,604 kg) |
| Cab Max capacity |
12,125 lbs (5,499 kg) |
Tires and tread
| Front tread |
52 to 77 inches (132 to 195 cm, 2WD straight), 48 to 80 inches (121 to 203 cm, 2WD sweptback), 52 to 80 inches (132 to 203 cm, 2WD low), 52 to 77 inches (132 to 195 cm, 2WD low-low), or 88 to 96 inches (223 to 243 cm, tobacco) |
| 2WD Standard tires (ag) |
Front: 7.50-16. Rear: 16.9-28 |
| 4WD Standard tires (ag) |
Front: 8.3-24. Rear: 16.9-28 |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
