Case IH 956 XL Specifications

The Case IH 956 XL specifications include engine power rated at 95 hp (70.8 kW), a 16-forward, 8-reverse transmission and a listed weight of 9,458 to 10,300 lbs.

Case IH 956 XL key specifications

Engine power 95 hp (70.8 kW)
Displacement 358 cu in (5.9 L)
Transmission 16 forward and 8 reverse
Weight 9,458 to 10,300 lbs
Rear PTO 540 or 1,000 rpm

Case IH 956 XL industry comparison

See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.

Engine power95 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
Displacement5.9 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Weight10,300 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
This model Industry average

Case IH 956 XL dimensions chart

Compare the main listed tractor dimensions using centimetres.

Width230 cm
Cab height277 cm

Engine specifications

Bore/Stroke 3.875 × 5.0625 inches (98 × 129 mm)
Rated RPM 2,200
Torque 261.8 lb-ft (355.0 Nm)
Torque RPM 1,400
Fuel system direct injection
Oil capacity 12.7 qt (12.0 L)
Starter electric
Starter volts 12
Oil change 200 h

PTO and hitch

Rear hitch category Category II
Hitch control position and draft control
Rear lift 9,532 lbs (4,323 kg)

Hydraulics

Hydraulic pressure 2,538 psi (175.0 bar)
Valves up to 3
Pump flow 11.4 gpm (43.1 L/min)

Electrical specifications

Electrical ground negative
Charging system alternator
Charging amps 55
Battery volts 12

Dimensions and weight

Width 90.8 inches (230 cm)
Cab height 109.1 inches (277 cm)
2WD front axle clearance 20.2 inches (51 cm)
4WD front axle clearance 17.2 inches (43 cm)

Tires and tread

Rear tread 67.1 to 86.8 inches (170 to 220 cm, 4WD)
Standard tires (ag) Front: 7.50-20. Rear: 16.9R38 (2WD)

Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.