The Case IH 956 XL dimensions found are: length is 165.1 inches | 419 cm, width is 90.8 inches | 230 cm, height is 109.1 inches | 277 cm, and wheelbase is 103.5 inches | 262 cm.
Length165.1 inches | 419 cm
Width90.8 inches | 230 cm
Height109.1 inches | 277 cm
Wheelbase103.5 inches | 262 cm
Case IH 956 XL Dimensions
Overall length
2WD: 165.1 inches | 419 cm | 4WD: 167.7 inches | 425 cm
Overall width
90.8 inches | 230 cm
Overall height
Cab: 109.1 inches | 277 cm
Wheelbase
2WD: 103.5 inches | 262 cm | 4WD: 102 inches | 259 cm
Ground clearance
2WD front axle: 20.2 inches | 51 cm | 4WD front axle: 17.2 inches | 43 cm
Front tread
2WD: 60.1 to 95.2 inches | 152 to 241 cm | 4WD: 64.3 to 76.1 inches | 163 to 193 cm
Rear tread
67.1 to 86.8 inches | 170 to 220 cm (4WD)
Case IH 956 XL Weight
2WD Weight
9458 lbs | 4290 kg
4WD Weight
10300 lbs | 4672 kg
Case IH 956 XL Dimension Comparison Charts
Length comparison
This model
165.1 in
Average
190 in
Low
155 in
High
240 in
Width comparison
This model
90.8 in
Average
96 in
Low
78 in
High
120 in
Height comparison
This model
109.1 in
Average
125 in
Low
105 in
High
150 in
Wheelbase comparison
This model
103.5 in
Average
115 in
Low
95 in
High
145 in
Ground clearance comparison
This model
20.2 in
Average
18 in
Low
12 in
High
26 in
Weight comparison
This model
9,458 lbs
Average
13,000 lbs
Low
8,000 lbs
High
22,000 lbs
Floor space footprint
This model
104 sq ft
Average
130 sq ft
Low
90 sq ft
High
200 sq ft
Benchmarks use practical low, average and high dimension ranges for the large ag tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Case IH 956 XL Extra Dimension Notes
Storage and fit note
Using the first listed dimension values, the Case IH 956 XL is about 165.1 inches | 419 cm long, about 90.8 inches | 230 cm wide, and about 109.1 inches | 277 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
Case IH 956 XL Dimensions FAQ
Is the Case IH 956 XL a long tractor?
The Case IH 956 XL is on the shorter side at 165.1 in, which is below the 190 in benchmark average. That makes its listed length easier to fit than many tractors in the same large ag tractor range.
Is the Case IH 956 XL narrow enough for tight storage?
The listed width is middle-of-the-pack at 90.8 in, which is close to the 96 in benchmark average. It is not especially narrow, but it is not unusually wide either.
Is the Case IH 956 XL tall for a shed or garage?
The listed height is low for the category at 109.1 in, which is below the 125 in benchmark average. That is better for low shed doors, but attachments and ROPS can still change the real clearance needed.
How much floor space does the Case IH 956 XL need?
The bare footprint is about 104 sq ft from a 13.8 ft length and 7.6 ft width. That is below the 130 sq ft benchmark for this category.
Does the Case IH 956 XL have a short or long wheelbase?
The wheelbase is average for the category at 103.5 in, which is close to the 115 in benchmark average. It sits near the normal benchmark for this tractor size.
Does the Case IH 956 XL have good ground clearance?
The listed ground clearance is high for the category at 20.2 in, which is above the 18 in benchmark average. It has more underside clearance than the benchmark average.
Is the Case IH 956 XL heavy for its size?
The listed weight is light for the category at 9,458 lbs, which is below the 13,000 lbs benchmark average. That points to an easier-to-transport tractor than heavier models in the same class, before ballast or attachments are added.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official caseih.com website before making shed, trailer, garage or transport decisions.
