The Case IH 956 XL tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 11.4 gpm | 43.1 lpm, hydraulic pressure is 2538 psi | 175.0 bar, and valves/remotes are listed as up to 3.
Case IH 956 XL Hydraulic Capacity & Flow Specs
| Hydraulic pressure | 2538 psi | 175.0 bar |
|---|---|
| Pump flow | 11.4 gpm | 43.1 lpm |
| Hydraulic valves | up to 3 |
Case IH 956 XL Hitch, Remote & Lift Specs
| Rear hitch type | II |
|---|---|
| Rear hitch control | position and draft control |
| Rear lift | 9532 lbs | 4323 kg |
Case IH 956 XL Useful Hydraulic Calculations
| Rear lift per pump gpm | 836.1 lb per gpm |
|---|---|
| Estimated hydraulic horsepower | about 16.9 hydraulic hp from listed pressure and pump flow |
Case IH 956 XL Hydraulic Comparison Charts
Pump flow comparison
Hydraulic pressure comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH 956 XL Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | Wet disc brakes |
Case IH 956 XL Hydraulic Capacity FAQ
Why is the Case IH 956 XL hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH 956 XL, but pump flow is 11.4 gpm | 43.1 lpm, pressure is 2538 psi | 175.0 bar, and lift is listed as 9532 lbs | 4323 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH 956 XL hydraulics feel fast or slow?
The useful speed clue is 11.4 gpm | 43.1 lpm pump flow, below the 14 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the Case IH 956 XL hydraulic pressure tell you?
The pressure spec is 2538 psi | 175.0 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Case IH 956 XL?
On the Case IH 956 XL, 11.4 gpm | 43.1 lpm pump flow points to slower loader and cylinder movement, 2,538 psi pressure affects force more than speed, and 9,532 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH 956 XL?
For implement matching, the useful checks are 11.4 gpm flow, 2,538 psi pressure, 9,532 lb listed lift, and up to 3 remote/valve listing. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, normal on pressure for the class, and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH 956 XL rear lift capacity strong?
The listed lift figure is 9532 lbs | 4323 kg, above the 7,000 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Are the Case IH 956 XL hydraulic remotes enough?
The Case IH 956 XL remote/valve listing is up to 3. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Case IH 956 XL hydraulics handle long hydraulic jobs?
The useful heat clues are 11.4 gpm flow, 2,538 psi pressure, and about 16.9 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the Case IH 956 XL make on paper?
Using 2,538 psi and 11.4 gpm, the rough pressure-flow estimate is about 16.9 hydraulic hp. That is a useful middle-range hydraulic power figure for normal tractor work. It is a comparison number, not engine horsepower.
What do the Case IH 956 XL hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II, hitch control is position and draft control, and listed lift is 9532 lbs | 4323 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
