The drive belt part number found is 754-04060. The drive belt size found is 77 in (1,956 mm) long by 0.5 in (13 mm) wide.
Cub Cadet 1715 Belt Size and Part Numbers
| Drive belt part number | 754-04060 |
|---|---|
| Drive belt length | 77 in (1,956 mm) |
| Drive belt width | 0.5 in (13 mm) |
Belt Size Comparison Chart
Belt length comparison
Belt width comparison
Cub Cadet 1715 Belt Notes
| Drive belt note | The Cub Cadet 1715 drive or transmission belt listing shows part number 754-04060, length 77 in (1,956 mm) and width 0.5 in (13 mm). Do not mix it up with the deck belt because the routing and job are different |
|---|---|
| Fitment note | The blunt rule with the Cub Cadet 1715: part number beats guesswork. If the belt is off by even a small amount, it can slip, squeal, jump pulleys or wear fast |
Cub Cadet 1715 Belt Size FAQ
What should you check when fitting a 77 in (1,956 mm) drive belt on the Cub Cadet 1715?
The drive belt length found is 77 in (1,956 mm). This is a mid-length belt run, so routing and idler position still matter more than just matching a close-looking belt. Also check the idler spring and pulley grooves because drive belts can slip under load even when they look fine at idle
Why does 0.5 in (13 mm) belt width matter on the Cub Cadet 1715?
The captured drive belt width is 0.5 in (13 mm). Pulley grooves are cut for a matching belt profile. Wrong width can cause squeal, heat, poor blade speed or fast belt wear
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official cubcadet.com before ordering a replacement belt.
