The Cub Cadet 1772 deck belt part number found is 754-3022. The drive belt part number found is 754-3022. The drive belt size found is 92 in (2,337 mm) long by 0.5 in (13 mm) wide.
Cub Cadet 1772 Belt Size and Part Numbers
| Mower deck belt part number | 754-3022 |
|---|---|
| Drive belt part number | 754-3022 |
| Drive belt length | 92 in (2,337 mm) |
| Drive belt width | 0.5 in (13 mm) |
Belt Size Comparison Chart
Belt length comparison
Belt width comparison
Cub Cadet 1772 Belt Notes
| Mower deck belt note | The Cub Cadet 1772 deck belt part number captured here is 754-3022. Match the old belt, deck size and routing before spending money |
|---|---|
| Drive belt note | The Cub Cadet 1772 drive or transmission belt listing shows part number 754-3022, length 92 in (2,337 mm) and width 0.5 in (13 mm). Do not mix it up with the deck belt because the routing and job are different |
| Fitment note | Belts are cheap until you buy the wrong one twice. On the Cub Cadet 1772, confirm belt route, old belt label and OEM part number before ordering |
Cub Cadet 1772 Belt Size FAQ
What should you check when fitting a 92 in (2,337 mm) drive belt on the Cub Cadet 1772?
The drive belt length found is 92 in (2,337 mm). This is a mid-length belt run, so routing and idler position still matter more than just matching a close-looking belt. Also check the idler spring and pulley grooves because drive belts can slip under load even when they look fine at idle
Why does 0.5 in (13 mm) belt width matter on the Cub Cadet 1772?
The captured drive belt width is 0.5 in (13 mm). Pulley grooves are cut for a matching belt profile. Wrong width can cause squeal, heat, poor blade speed or fast belt wear
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official cubcadet.com before ordering a replacement belt.
