The Kubota STA-35 has a 3-point hitch lift capacity of 2,650 lb (1,202 kg). It also lists hitch category Category 1, hydraulic pump flow 8.2 gpm (31 L/min), and operating weight 2,800 lb (1,270 kg).
Best rear lift figure2,650 lb (1,202 kg)
Hitch categoryCategory 1
Operating weight2,800 lb (1,270 kg)
Kubota STA-35 3-Point Hitch Lift Capacity
3-point hitch lift capacity
2,650 lb (1,202 kg)
Hitch category
Category 1
Hydraulic pump flow
8.2 gpm (31 L/min)
Operating weight
2,800 lb (1,270 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
2,650 lb
Average
2,400 lb
Low
1,200 lb
High
4,500 lb
Hydraulic pump flow comparison
This model
8.2 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Operating weight comparison
This model
2,800 lb
Average
2,600 lb
Low
1,500 lb
High
4,500 lb
Kubota STA-35 Hitch and Rear Lift Notes
Hitch category note
Hitch category on the Kubota STA-35 is Category 1. That is one of the first checks before buying a rear blade, tiller, mower or ballast box
Hydraulic flow note
The Kubota STA-35’s captured hydraulic pump flow is 8.2 gpm (31 L/min). Lift capacity is still the main hitch number, but pump flow helps describe hydraulic capability
Operating weight note
The Kubota STA-35 operating weight is listed as 2,800 lb (1,270 kg). Tractor weight matters because a machine can sometimes lift more than it should comfortably carry on rough ground
Rear implement matching
For the Kubota STA-35, compare 2,650 lb (1,202 kg) with real implement weight. Common rear-implement checks include rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box
Kubota STA-35 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota STA-35?
Rear lift capacity for the Kubota STA-35 is shown as 2,650 lb (1,202 kg) for 3-point hitch lift capacity. For real attachment matching, match implements carefully, especially if the attachment is long or carries weight far behind the hitch.
What lift measurement should I compare?
Compare the most conservative rear-lift figure you can find for the Kubota STA-35, ideally the 24-inch behind-the-link-ends rating if it is available.
Does hitch category matter on the Kubota STA-35?
Yes. The Kubota STA-35 is listed as Category 1, and that decides what rear implements physically connect cleanly.
How should I match rear implements to the Kubota STA-35?
Start with 2,650 lb (1,202 kg) for 3-point hitch lift capacity, then compare the actual implement weight and overhang. Typical checks include rotary cutter, medium tiller, grader blade, seeder, and heavy ballast box.
Do hydraulic flow and weight matter for the Kubota STA-35?
Yes. The Kubota STA-35 lists hydraulic pump flow of 8.2 gpm (31 L/min) and operating weight of 2,800 lb (1,270 kg). Lift capacity says what it can raise; flow and weight help describe hydraulic response and stability.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
