The Kubota STV36 has a 3-point hitch lift capacity of 1,500 lb (680 kg) at 24 inches behind the link ends. It also lists hitch category Category 1, hydraulic pump flow 10.6 gpm (40.1 L/min), and operating weight 2,502 lb (1,135 kg).
Best rear lift figure1,500 lb (680 kg)
Lift at 24 inches1,500 lb (680 kg)
Hitch categoryCategory 1
Operating weight2,502 lb (1,135 kg)
Kubota STV36 3-Point Hitch Lift Capacity
3-point hitch lift capacity
2,200 lb (998 kg)
Lift capacity at 24 inches behind link ends
1,500 lb (680 kg)
Hitch category
Category 1
Hitch control type
position control
Hydraulic pump flow
10.6 gpm (40.1 L/min)
Operating weight
2,502 lb (1,135 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
1,500 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Lift at 24 inches comparison
This model
1,500 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Hydraulic pump flow comparison
This model
10.6 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Operating weight comparison
This model
2,502 lb
Average
2,600 lb
Low
1,500 lb
High
4,500 lb
Kubota STV36 Hitch and Rear Lift Notes
Rear lift capacity note
The key hitch number for the Kubota STV36 is 1,500 lb (680 kg) (lift at 24 inches behind the link ends). In plain terms, it is useful for compact implements like box blades, small tillers, rotary cutters, ballast boxes and rear blades
24-inch lift note
For the Kubota STV36, the 1,500 lb (680 kg) 24-inch lift spec is the one to use when comparing tillers, blades, mowers, seeders and ballast boxes
Hitch control note
For the Kubota STV36, position control is listed as hitch-control context. Do not size implements from this field; use lift capacity and hitch category first
Hydraulic flow note
For hydraulic context, the Kubota STV36 is listed at 10.6 gpm (40.1 L/min). Do not confuse pump flow with lift capacity; they answer different questions
Operating weight note
Weight matters with rear implements. The Kubota STV36’s captured operating weight is 2,502 lb (1,135 kg), which affects ballast, traction and stability
Rear implement matching
Do not buy rear implements by model number alone. Match the Kubota STV36’s lift capacity against gear like box blade, small rotary cutter, tiller, ballast box, and rear blade
Kubota STV36 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota STV36?
Rear lift capacity for the Kubota STV36 is shown as 1,500 lb (680 kg) for lift at 24 inches behind the link ends. For real attachment matching, stay conservative with heavy attachments and allow margin for implement overhang.
Is the 24-inch lift rating the one to trust?
For most rear implements, yes. The Kubota STV36 is listed at 1,500 lb (680 kg) at 24 inches behind the link ends, which better reflects weight hanging behind the hitch points.
Does hitch category matter on the Kubota STV36?
Yes. The Kubota STV36 is listed as Category 1, and that decides what rear implements physically connect cleanly.
How should I match rear implements to the Kubota STV36?
Start with 1,500 lb (680 kg) for lift at 24 inches behind the link ends, then compare the actual implement weight and overhang. Typical checks include box blade, small rotary cutter, tiller, ballast box, and rear blade.
Is lift capacity enough to size implements for the Kubota STV36?
No. The Kubota STV36 may list 1,500 lb (680 kg) of rear lift, but the 2,502 lb (1,135 kg) operating weight and 10.6 gpm (40.1 L/min) hydraulic flow also matter for real work.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
