The Case IH Magnum 400 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 44 gpm | 166.5 lpm, hydraulic pressure is 3046 psi | 210.0 bar, and hydraulic type is pressure flow compensating (PFC).
Case IH Magnum 400 Hydraulic Capacity & Flow Specs
| Hydraulic type | pressure flow compensating (PFC) |
|---|---|
| Hydraulic pressure | 3046 psi | 210.0 bar |
| Pump flow | 44 gpm | 166.5 lpm |
| Hydraulic valves | 5 or 6 |
Case IH Magnum 400 Hitch, Remote & Lift Specs
| Rear hitch type | IV/III |
|---|---|
| Rear lift | 19900 lbs | 9026 kg |
| Front lift | 9426 lbs | 4275 kg |
Case IH Magnum 400 Useful Hydraulic Calculations
| Rear lift per pump gpm | 452.3 lb per gpm |
|---|---|
| Estimated hydraulic horsepower | about 78.2 hydraulic hp from listed pressure and pump flow |
Case IH Magnum 400 Hydraulic Comparison Charts
Pump flow comparison
Hydraulic pressure comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH Magnum 400 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | Hydraulic wet disc brakes |
| Trailer brakes | hydraulic Optional |
| Differential lock | electro-hydraulic rear |
Case IH Magnum 400 Hydraulic Capacity FAQ
Why is the Case IH Magnum 400 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH Magnum 400, but pump flow is 44 gpm | 166.5 lpm, pressure is 3046 psi | 210.0 bar, system type is pressure flow compensating (PFC), and lift is listed as 19900 lbs | 9026 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH Magnum 400 hydraulics feel fast or slow?
The useful speed clue is 44 gpm | 166.5 lpm pump flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the Case IH Magnum 400 hydraulic pressure tell you?
The pressure spec is 3046 psi | 210.0 bar, close to the 3,100 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Case IH Magnum 400?
On the Case IH Magnum 400, 44 gpm | 166.5 lpm pump flow points to slower loader and cylinder movement, 3,046 psi pressure affects force more than speed, and 19,900 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH Magnum 400?
For implement matching, the useful checks are 44 gpm flow, 3,046 psi pressure, 19,900 lb listed lift, and 5 or 6 remote/valve listing. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, normal on pressure for the class, and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH Magnum 400 rear lift capacity strong?
The listed lift figure is 19900 lbs | 9026 kg, above the 15,500 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Are the Case IH Magnum 400 hydraulic remotes enough?
The Case IH Magnum 400 remote/valve listing is 5 or 6. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Case IH Magnum 400 hydraulics handle long hydraulic jobs?
The useful heat clues are 44 gpm flow, 3,046 psi pressure, and about 78.2 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the Case IH Magnum 400 make on paper?
Using 3,046 psi and 44 gpm, the rough pressure-flow estimate is about 78.2 hydraulic hp. That is a serious hydraulic power figure for demanding hydraulic functions. It is a comparison number, not engine horsepower.
What do the Case IH Magnum 400 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is IV/III and listed lift is 19900 lbs | 9026 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
