The Kubota L4610 has a 3-point hitch lift capacity of 1,500 lb (680 kg) at 24 inches behind the link ends. It also lists hitch category Category 1 and hydraulic pump flow 9.6 gpm (36.3 L/min).
Best rear lift figure1,500 lb (680 kg)
Lift at 24 inches1,500 lb (680 kg)
Hitch categoryCategory 1
Kubota L4610 3-Point Hitch Lift Capacity
3-point hitch lift capacity
3,200 lb (1,451 kg)
Lift capacity at 24 inches behind link ends
1,500 lb (680 kg)
Hitch category
Category 1
Hydraulic pump flow
9.6 gpm (36.3 L/min)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
1,500 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Lift at 24 inches comparison
This model
1,500 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Hydraulic pump flow comparison
This model
9.6 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Kubota L4610 Hitch and Rear Lift Notes
Rear lift capacity note
The Kubota L4610 rear hitch spec points to 1,500 lb (680 kg) for lift at 24 inches behind the link ends. Use that number before assuming a heavy rear implement will lift safely
24-inch lift note
Use the 24-inch number first. It is usually closer to how a real implement loads the 3-point hitch
Hitch category note
If you are matching implements to the Kubota L4610, start with Category 1, then check lift capacity and tractor stability
Hydraulic flow note
The 9.6 gpm (36.3 L/min) hydraulic flow figure helps round out the Kubota L4610’s rear-implement picture, especially where hydraulic attachments or remotes are involved
Rear implement matching
The practical reason to check rear lift on the Kubota L4610 is implement fit. Think box blade, small rotary cutter, tiller, ballast box, and rear blade, then compare actual implement weight
Kubota L4610 3-Point Hitch FAQ
How much can the Kubota L4610 rear 3-point hitch lift?
The main rear-lift number captured for the Kubota L4610 is 1,500 lb (680 kg). Use that as the first-pass number for rear implements, not as a front-loader rating.
Why does the 24-inch rear lift spec matter?
The 1,500 lb (680 kg) rating matters because mounted implements put weight behind the lift arms. That extra distance makes the tractor work harder than a close-in hitch-end test.
What hitch category is the Kubota L4610?
The listed hitch category for the Kubota L4610 is Category 1. Match implement pins and hitch width to that category before worrying about lift capacity.
Can the Kubota L4610 handle heavy rear attachments?
The Kubota L4610’s useful lift reference is 1,500 lb (680 kg). It may suit box blade, small rotary cutter, tiller, ballast box, and rear blade, but stay conservative with heavy attachments and allow margin for implement overhang.
Does hydraulic pump flow matter for the Kubota L4610?
Yes, but it is not the same as lift capacity. The Kubota L4610 is listed at 9.6 gpm (36.3 L/min) hydraulic pump flow, while the rear lift number tells you what the hitch can raise.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
