Coolant capacity for the John Deere 1030VU is 2.65 gal (10 L). The coolant type is listed as John Deere Cool-Gard II, and the antifreeze mix is The recommended coolant type for the John Deere 1030 tractor is John Deere Cool-Gard II.
Coolant capacity2.65 gal (10 L)Cooling system refill amount
Antifreeze mixThe recommended coolant type for the John Deere 1030 tractor is John Deere Cool-Gard IIFreeze/boil protection
John Deere 1030VU Coolant Capacity Specs
Coolant capacity
2.65 gal (10 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
The recommended coolant type for the John Deere 1030 tractor is John Deere Cool-Gard II
Engine horsepower
45.6 hp
Engine displacement
164.5 cu in (2.7 L)
John Deere 1030VU Coolant Capacity Guide
Coolant capacity guide
This model
2.65 gal
Class low
1.5 gal
Class typical
3.5 gal
Class high
6 gal
Compared with a broad compact tractor guide, not the full tractor dataset.
John Deere 1030VU Coolant Service Notes
Coolant capacity note
The useful service number here is 2.65 gal (10 L). Keep some extra coolant available because trapped air can lower the level after the first warm-up
Coolant service note
A proper coolant change on the John Deere 1030VU means using the 2.65 gal (10 L) capacity and keeping the coolant chemistry consistent with John Deere Cool-Gard II and The recommended coolant type for the John Deere 1030 tractor is John Deere Cool-Gard II
Coolant type note
For the John Deere 1030VU, coolant choice is listed as John Deere Cool-Gard II. Capacity tells you how much; coolant type tells you what to use
Antifreeze mix note
The John Deere 1030VU coolant mix guidance is The recommended coolant type for the John Deere 1030 tractor is John Deere Cool-Gard II. This matters most in freezing weather, hot work and long service intervals
Refill check
For the John Deere 1030VU, 2.65 gal (10 L) is the planned refill amount. The final level may need a small top-up after trapped air leaves the system
Engine context
The John Deere 1030VU engine specs listed with this page are engine horsepower 45.6 hp and engine displacement 164.5 cu in (2.7 L). They help identify the machine, but they are not a substitute for the coolant capacity
John Deere 1030VU Coolant Capacity FAQ
What is the John Deere 1030VU cooling system capacity?
For coolant service, the John Deere 1030VU is listed at 2.65 gal (10 L). Buy enough coolant for that amount and confirm the final level at the machine
What coolant is recommended for the John Deere 1030VU?
The listed coolant type for the John Deere 1030VU is John Deere Cool-Gard II. Match that coolant chemistry before topping up or flushing the system
Should I use premixed coolant in the John Deere 1030VU?
The John Deere 1030VU coolant mix guidance is The recommended coolant type for the John Deere 1030 tractor is John Deere Cool-Gard II. Keep the mix consistent when topping up so freeze and boil protection stay in range
Can the John Deere 1030VU coolant level drop after refilling?
Do not judge the job only by pouring in 2.65 gal (10 L). The final check is the actual radiator or overflow level after the system has burped air
Should I flush the John Deere 1030VU cooling system or just top it up?
Topping up is fine for a small low-level correction. If the coolant is old, rusty, oily, diluted or the wrong type, drain and flush the system using the 2.65 gal (10 L) capacity as the refill guide
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
