For the John Deere 1030, coolant capacity is 2.75 gal (10.4 L). Coolant choice is listed as John Deere Cool-Gard II, with The recommended coolant type for the John Deere 1030 tractor is John Deere Cool-Gard II guidance.
Coolant capacity2.75 gal (10.4 L)Cooling system refill amount
Antifreeze mixThe recommended coolant type for the John Deere 1030 tractor is John Deere Cool-Gard IIFreeze/boil protection
John Deere 1030 Coolant Capacity Specs
Coolant capacity
2.75 gal (10.4 L)
Coolant type
John Deere Cool-Gard II
Antifreeze mix
The recommended coolant type for the John Deere 1030 tractor is John Deere Cool-Gard II
Engine horsepower
48.3 hp
Engine displacement
164.4 cu in (2.69 L)
John Deere 1030 Coolant Capacity Guide
Coolant capacity guide
This model
2.75 gal
Class low
1.5 gal
Class typical
3.5 gal
Class high
6 gal
Compared with a broad compact tractor guide, not the full tractor dataset.
John Deere 1030 Coolant Service Notes
Coolant capacity note
The John Deere 1030 cooling system is listed at 2.75 gal (10.4 L). Final level can settle after the first heat cycle, so recheck the level after service
Coolant service note
For a full coolant service on the John Deere 1030, plan around 2.75 gal (10.4 L) and match the listed coolant guidance: John Deere Cool-Gard II and The recommended coolant type for the John Deere 1030 tractor is John Deere Cool-Gard II
Coolant type note
The John Deere 1030 coolant type is John Deere Cool-Gard II. Wrong coolant chemistry can reduce corrosion, freeze and boil protection
Antifreeze mix note
The listed mix for the John Deere 1030 is The recommended coolant type for the John Deere 1030 tractor is John Deere Cool-Gard II. Keep the coolant strength in range after a drain, flush or top-up
Refill check
After a drain and refill on the John Deere 1030, the cooling system can burp air. Recheck the level after the first warm-up and cool-down cycle
Engine context
The John Deere 1030 engine specs listed with this page are engine horsepower 48.3 hp and engine displacement 164.4 cu in (2.69 L). They help identify the machine, but they are not a substitute for the coolant capacity
John Deere 1030 Coolant Capacity FAQ
How much coolant does the John Deere 1030 take?
Plan around 2.75 gal (10.4 L) when servicing coolant on the John Deere 1030. Recheck the system when cool because air pockets can lower the level
Does the John Deere 1030 use John Deere Cool-Gard coolant?
Coolant type for the John Deere 1030 is listed as John Deere Cool-Gard II. If the system has been filled with something else before, confirm compatibility before mixing
What coolant mix is listed for the John Deere 1030?
The John Deere 1030 uses The recommended coolant type for the John Deere 1030 tractor is John Deere Cool-Gard II where that mix is specified. Confirm the mix against your climate and manual
Do I need to recheck coolant level after servicing the John Deere 1030?
Yes. Use the 2.75 gal (10.4 L) figure as the refill guide, but always recheck level after warm-up and cool-down because trapped air can move through the system
When should contaminated coolant be replaced in the John Deere 1030?
If the John Deere 1030 coolant is only slightly low and otherwise clean, topping up with compatible coolant can be enough. If condition is poor, drain and refill instead
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
