The John Deere 1035 coolant capacity is 14 gal (53 L). Use this as the cooling-system refill amount and recheck the level after the engine cools.
Coolant capacity14 gal (53 L)Cooling system refill amount
John Deere 1035 Coolant Capacity Specs
Coolant capacity
14 gal (53 L)
Engine horsepower
50.3 hp
Engine displacement
165 cu in (2.7 L)
John Deere 1035 Coolant Capacity Guide
Coolant capacity guide
This model
14 gal
Class low
1.5 gal
Class typical
3.5 gal
Class high
6 gal
Compared with a broad compact tractor guide, not the full tractor dataset.
John Deere 1035 Coolant Service Notes
Coolant capacity note
The John Deere 1035 cooling system is listed at 14 gal (53 L). Final level can settle after the first heat cycle, so recheck the level after service
Coolant service note
For a full coolant service on the John Deere 1035, plan around 14 gal (53 L), refill slowly, run the engine, let it cool and recheck the level
Refill check
When refilling the John Deere 1035, do not pour in 14 gal (53 L) and walk away. Fill slowly, run the engine, let it cool and recheck the level
Engine context
For comparison, the John Deere 1035 engine details listed here are engine horsepower 50.3 hp and engine displacement 165 cu in (2.7 L). The coolant capacity remains the service number to use for refilling
John Deere 1035 Coolant Capacity FAQ
What is the refill amount for the John Deere 1035 cooling system?
A full coolant refill on the John Deere 1035 is listed at 14 gal (53 L). Fill slowly and allow for a small top-up after the first heat cycle
Should I run the John Deere 1035 after adding coolant?
Check the John Deere 1035 coolant level cold after service. Hot coolant is pressurized and dangerous, so let the system cool before opening the cap
When is a full coolant flush better than a top-up on the John Deere 1035?
If coolant condition is good, topping up may be enough. If it is old or contaminated, a full drain and refill is safer for the John Deere 1035
Official information note
Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.
