The John Deere S240 is 36.8 in wide and 43.6 in tall, with a 48 in wheelbase.
Width36.8 in (3 ft 0.8 in) / 934.7 mm
Height43.6 in (3 ft 7.6 in) / 1,107.4 mm
Wheelbase48 in (4 ft 0 in) / 1,219.2 mm
John Deere S240 Dimensions
Overall width
36.8 in (3 ft 0.8 in) / 934.7 mm
Overall height
43.6 in (3 ft 7.6 in) / 1,107.4 mm
Wheelbase
48 in (4 ft 0 in) / 1,219.2 mm
Tractor Size Comparison Chart
Overall width comparison
This model
36.8 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
43.6 in
Average
79.8 in
Low
36 in
High
156 in
Wheelbase comparison
This model
48 in
Average
82.8 in
Low
34.8 in
High
190.5 in
John Deere S240 Extra Dimension Notes
Storage fit note
The John Deere S240 can be treated as a tighter-storage tractor. With width 36.8 in (3 ft 0.8 in) / 934.7 mm and height 43.6 in (3 ft 7.6 in) / 1,107.4 mm, check ROPS/cab height and loader length.
Fitment note
For access planning, the John Deere S240 gives you width at 36.8 in (3 ft 0.8 in) / 934.7 mm and height at 43.6 in (3 ft 7.6 in) / 1,107.4 mm. Measure the opening, not just the indoor floor area.
Wheelbase note
The listed wheelbase for the John Deere S240 is 48 in (4 ft 0 in) / 1,219.2 mm. This is a key number for comparing same-series tractors.
Storage Tips
Big tractors need service room around them, not just enough space to squeeze inside.
A 48 in wheelbase means the approach into the storage bay matters, not just the doorway width.
Storage FAQ
Will it fit in a garage?
Do not judge it by floor length alone. This tractor is length not captured long, 36.8 in wide and 43.6 in tall, so the garage check needs height, width and depth clearance together: about 7 ft high and 8 ft wide.
What size door should I check?
For this very large farm tractor, check the narrowest real opening. A doorway close to 36.8 in wide or 43.6 in tall is not enough; aim for roughly 7 ft high, 8 ft wide.
Do attachments change the storage size?
Yes. The bare tractor is length not captured long, 36.8 in wide and 43.6 in tall; a loader, mower deck, ballast box or rear implement can push the parked size past those numbers.
How much maneuvering room should I allow?
If attachments stay fitted, maneuvering room must be based on the attached length, not just the length not captured bare tractor length and 48 in wheelbase.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
