The John Deere S220 is 75.1 in long, 20 in wide, and 45 in tall.
Length75.1 in (6 ft 3.1 in) / 1,907.5 mm
Width20 in (1 ft 8 in) / 508 mm
Height45 in (3 ft 9 in) / 1,143 mm
John Deere S220 Dimensions
Overall length
75.1 in (6 ft 3.1 in) / 1,907.5 mm
Overall width
20 in (1 ft 8 in) / 508 mm
Overall height
45 in (3 ft 9 in) / 1,143 mm
Rear tread width
20 in (1 ft 8 in) / 508 mm
Tractor Size Comparison Chart
Overall length comparison
This model
75.1 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
20 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
45 in
Average
79.8 in
Low
36 in
High
156 in
John Deere S220 Extra Dimension Notes
Size class note
From a storage and access point of view, the John Deere S220 behaves like a small compact tractor. It is sized more for acreage, yard work, loader jobs and tight property access than large field work.
Fitment note
The John Deere S220 is best judged by length at 75.1 in (6 ft 3.1 in) / 1,907.5 mm, width at 20 in (1 ft 8 in) / 508 mm, and height at 45 in (3 ft 9 in) / 1,143 mm. The biggest issue is usually width or height, not just floor length.
Tread width note
The captured tread data for the John Deere S220 gives rear tread only: 20 in (1 ft 8 in) / 508 mm.
Storage Tips
Floor space is not enough; check the door height, side clearance and attachment length.
Use the bare dimensions only as a starting point; a practical storage target is a clear opening around 7 ft high, 8 ft wide, and 15 ft deep.
This is a smaller tractor class, so tight acreage sheds and small equipment bays are realistic if the doorway clears.
Storage FAQ
Will it fit in a garage?
A garage may work only when the clear opening is larger than 45 in high and 20 in wide, and the bay is longer than 75.1 in. For this machine, use 7 ft high, 8 ft wide, and 15 ft deep as the better rule.
What size door should I check?
Start with the hard numbers: 45 in high, 20 in wide and 75.1 in long. Then step up to a practical storage target of about 7 ft high, 8 ft wide, and 15 ft deep.
Do attachments change the storage size?
Yes. Treat 75.1 in as the bare length only. If front or rear gear stays fitted, add roughly 2 ft to 4 ft to the depth check before trusting the fit.
How much maneuvering room should I allow?
If posts, fences or parked equipment sit near the doorway, go wider than 8 ft. A 20 in wide tractor needs side margin when entering at any angle.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
