The John Deere 1030 is 133 in long, 65.9 in wide, and 90.9 in tall, with a 74.3 in wheelbase.
Length133 in (11 ft 1 in) / 3,378.2 mm
Width65.9 in (5 ft 5.9 in) / 1,673.9 mm
Height90.9 in (7 ft 6.9 in) / 2,308.9 mm
Wheelbase74.3 in (6 ft 2.3 in) / 1,887.2 mm
John Deere 1030 Dimensions
Overall length
133 in (11 ft 1 in) / 3,378.2 mm
Overall width
65.9 in (5 ft 5.9 in) / 1,673.9 mm
Overall height
90.9 in (7 ft 6.9 in) / 2,308.9 mm
Wheelbase
74.3 in (6 ft 2.3 in) / 1,887.2 mm
Tractor Size Comparison Chart
Overall length comparison
This model
133 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
65.9 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
90.9 in
Average
79.8 in
Low
36 in
High
156 in
Wheelbase comparison
This model
74.3 in
Average
82.8 in
Low
34.8 in
High
190.5 in
John Deere 1030 Extra Dimension Notes
Storage fit note
The John Deere 1030 storage fit is possible in the right shed. With length 133 in (11 ft 1 in) / 3,378.2 mm, width 65.9 in (5 ft 5.9 in) / 1,673.9 mm, and height 90.9 in (7 ft 6.9 in) / 2,308.9 mm, leave space for attachments and turning room.
Fitment note
For shed planning, the John Deere 1030 should be checked with length at 133 in (11 ft 1 in) / 3,378.2 mm, width at 65.9 in (5 ft 5.9 in) / 1,673.9 mm, and height at 90.9 in (7 ft 6.9 in) / 2,308.9 mm. Door height and width are the usual deal-breakers.
Wheelbase note
The John Deere 1030 wheelbase measurement is 74.3 in (6 ft 2.3 in) / 1,887.2 mm. It shows more than a simple model-series label.
Storage Tips
Do not use exact dimensions as the storage target; allow clearance for ROPS/cab setup, mirrors and attachments.
Measure the lowest overhead point, not the tallest part of the shed roof.
For a compact tractor, storage usually comes down to doorway height and attachment length.
Use the 74.3 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Storage FAQ
Will it fit in a garage?
Do not judge it by floor length alone. This tractor is 133 in long, 65.9 in wide and 90.9 in tall, so the garage check needs height, width and depth clearance together: about 9 ft high, 8 ft wide, and 15 ft deep.
What size door should I check?
A good doorway should let the tractor enter straight without clipping mirrors, tires or door tracks. With 65.9 in width and 90.9 in height, use around 8 ft wide and 9 ft high.
Do attachments change the storage size?
Yes. Check attachments against all three numbers: 90.9 in for overhead clearance, 65.9 in for side clearance and 133 in for bay depth.
How much maneuvering room should I allow?
Use the 74.3 in wheelbase plus the 133 in length together. The tractor may clear the doorway but still need space to swing the front or rear around.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
