The John Deere 1035 is 132 in long, 60 in wide, and 72 in tall, with a 61 in wheelbase.
Length132 in (11 ft 0 in) / 3,352.8 mm
Width60 in (5 ft 0 in) / 1,524 mm
Height72 in (6 ft 0 in) / 1,828.8 mm
Wheelbase61 in (5 ft 1 in) / 1,549.4 mm
Ground clearance7.7 in / 195.6 mm
John Deere 1035 Dimensions
Overall length
132 in (11 ft 0 in) / 3,352.8 mm
Overall width
60 in (5 ft 0 in) / 1,524 mm
Overall height
72 in (6 ft 0 in) / 1,828.8 mm
Wheelbase
61 in (5 ft 1 in) / 1,549.4 mm
Ground clearance
7.7 in / 195.6 mm
Tractor Size Comparison Chart
Overall length comparison
This model
132 in
Average
125.2 in
Low
44.5 in
High
346.3 in
Overall width comparison
This model
60 in
Average
70 in
Low
20 in
High
176 in
Overall height comparison
This model
72 in
Average
79.8 in
Low
36 in
High
156 in
Wheelbase comparison
This model
61 in
Average
82.8 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
7.7 in
Average
16.3 in
Low
3.5 in
High
65.4 in
John Deere 1035 Extra Dimension Notes
Fitment note
The John Deere 1035 has listed dimensions of length at 132 in (11 ft 0 in) / 3,352.8 mm, width at 60 in (5 ft 0 in) / 1,524 mm, and height at 72 in (6 ft 0 in) / 1,828.8 mm. Treat them as the starting point for storage and trailer planning.
Wheelbase note
The John Deere 1035 wheelbase is listed at 61 in (5 ft 1 in) / 1,549.4 mm. Wheelbase helps explain how planted or compact the tractor feels compared with similar models.
Ground clearance note
The John Deere 1035 shows 7.7 in / 195.6 mm ground clearance. That is the underside clearance figure in the dimension set.
Storage Tips
Floor space is not enough; check the door height, side clearance and attachment length.
For a compact tractor, storage usually comes down to doorway height and attachment length.
Use the 61 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Storage FAQ
Will it fit in a garage?
If your garage door is close to 72 in tall or 60 in wide, count it as too tight. The safer check for the John Deere 1035 is around 7 ft high, 8 ft wide, and 15 ft deep.
What size door should I check?
Measure the real clear opening, not the advertised door size. You need it to clear the John Deere 1035’s 72 in height and 60 in width, with about 15 ft for the 132 in length.
Do attachments change the storage size?
Yes. Measure the tractor in storage trim: highest point compared with 72 in, widest point compared with 60 in, and longest parked length compared with 132 in.
How much maneuvering room should I allow?
If you cannot approach straight, go wider than 8 ft. With 60 in tractor width and a 61 in wheelbase, angled entries need extra side margin.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
