The John Deere 2940 is 90.3 in wide, with a 81.1 in wheelbase.
Width90.3 in (7 ft 6.3 in) / 2,293.6 mm
Wheelbase81.1 in (6 ft 9.1 in) / 2,059.9 mm
Ground clearance15.7 in (1 ft 3.7 in) / 398.8 mm
John Deere 2940 Dimensions
Overall width
90.3 in (7 ft 6.3 in) / 2,293.6 mm
Wheelbase
81.1 in (6 ft 9.1 in) / 2,059.9 mm
Ground clearance
15.7 in (1 ft 3.7 in) / 398.8 mm
Rear tread width
18.4 in (1 ft 6.4 in) / 467.4 mm
Tractor Size Comparison Chart
Overall width comparison
This model
90.3 in
Average
64.6 in
Low
20 in
High
144 in
Wheelbase comparison
This model
81.1 in
Average
79.2 in
Low
34.8 in
High
190.5 in
Ground clearance comparison
This model
15.7 in
Average
16.4 in
Low
3.5 in
High
65.4 in
John Deere 2940 Extra Dimension Notes
Storage fit note
For storage, the John Deere 2940 is more tall-garage or small-shed territory. With width 90.3 in (7 ft 6.3 in) / 2,293.6 mm, a normal low garage may be tight.
Wheelbase note
A 81.1 in (6 ft 9.1 in) / 2,059.9 mm wheelbase on the John Deere 2940 helps explain its stance. Wheelbase is one of the better stability comparison numbers.
Ground clearance note
The John Deere 2940 ground clearance comes in at 15.7 in (1 ft 3.7 in) / 398.8 mm. It gives useful context for rougher property work.
Tread width note
The John Deere 2940 has a captured rear tread width of 18.4 in (1 ft 6.4 in) / 467.4 mm. Use it as a rear-stance reference only.
Storage Tips
Use a tall garage, barn bay or small machinery shed as the first storage check for the John Deere 2940.
Use the bare dimensions only as a starting point; a practical storage target is 12 ft wide.
The John Deere 2940 should be treated as broadacre-sized machinery for storage planning.
Wheelbase is 81.1 in, so leave room to line it up cleanly rather than forcing it through a tight angle.
If the tractor has wider tire settings, duals or spacers, recheck the actual width.
Storage FAQ
Will it fit in a garage?
The tractor itself is 90.3 in wide and 81.1 in wheelbase. For storage, that means the opening should be closer to the tractor height plus clearance high and 12 ft wide, with about the tractor length plus attachment room of usable depth.
What size door should I check?
Do not size the door to exactly height not captured by 90.3 in. For this model, use about the tractor height plus clearance height and 12 ft width, then allow the tractor length plus attachment room depth for the length not captured tractor length.
Do attachments change the storage size?
Yes. The John Deere 2940’s 90.3 in width and height not captured height are the starting point, but a mower deck can increase width and a loader or rear implement can increase length.
How much maneuvering room should I allow?
A door sized around 12 ft is only useful if the tractor can enter square. The John Deere 2940’s 81.1 in wheelbase means the approach path matters as much as the opening.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
