The New Holland Workmaster 55 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 12.6 gpm | 47.7 lpm, hydraulic type is open center, and valves/remotes are listed as 2 or 3.
Hydraulic Flow12.6 gpm | 47.7 lpm
Hydraulic Typeopen center
Valves / Remotes2 or 3
New Holland Workmaster 55 Hydraulic Capacity & Flow Specs
Hydraulic type
open center
Pump flow
12.6 gpm | 47.7 lpm
Steering flow
7.6 gpm | 28.8 lpm
Rear remotes
2 or 3
New Holland Workmaster 55 Useful Hydraulic Calculations
Steering flow vs pump flow
60.3% of listed pump flow
New Holland Workmaster 55 Hydraulic Comparison Charts
Pump flow comparison
This model
12.6 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland Workmaster 55 Steering, Brakes & Mechanical Hydraulic Notes
Steering
Power steering
New Holland Workmaster 55 Hydraulic Capacity FAQ
Why is the New Holland Workmaster 55 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland Workmaster 55, but pump flow is 12.6 gpm | 47.7 lpm and system type is open center. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland Workmaster 55 hydraulics feel fast or slow?
The useful speed clue is 12.6 gpm | 47.7 lpm pump flow, close to the 14 gpm benchmark for this group. It should be normal for general tractor hydraulic work, assuming the pump and valves are healthy.
What matters most for loader speed on the New Holland Workmaster 55?
On the New Holland Workmaster 55, 12.6 gpm | 47.7 lpm pump flow is around normal for loader/cylinder speed. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland Workmaster 55?
For implement matching, the useful checks are 12.6 gpm flow and 2 or 3 remote/valve listing. That combination is in the normal flow range for this size group, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Are the New Holland Workmaster 55 hydraulic remotes enough?
The New Holland Workmaster 55 remote/valve listing is 2 or 3. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the New Holland Workmaster 55 hydraulics handle long hydraulic jobs?
The useful heat clues are 12.6 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What hydraulic system does the New Holland Workmaster 55 use?
The hydraulic system is listed as open center with 12.6 gpm | 47.7 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the New Holland Workmaster 55 hydraulics?
For service planning, the system is listed as open center and flow is listed at 12.6 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
