The New Holland Workmaster 45 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 11.6 gpm | 43.9 lpm, hydraulic type is open center fixed displacement, and valves/remotes are listed as 1 or 2.
Hydraulic Flow11.6 gpm | 43.9 lpm
Hydraulic Typeopen center fixed displacement
Valves / Remotes1 or 2
Lift Capacity1,830 lbs | 830 kg
New Holland Workmaster 45 Hydraulic Capacity & Flow Specs
Hydraulic type
open center fixed displacement
Pump flow
11.6 gpm | 43.9 lpm
Total hydraulic flow
16.9 gpm | 64.0 lpm
Steering flow
5.3 gpm | 20.1 lpm
Hydraulic valves
1 or 2
New Holland Workmaster 45 Hitch, Remote & Lift Specs
Rear hitch type
2/1
Rear hitch control
position control
Rear lift at 24 inches
1,830 lbs | 830 kg
New Holland Workmaster 45 Useful Hydraulic Calculations
Total flow vs pump flow
145.7% of listed pump flow
Steering flow vs pump flow
45.7% of listed pump flow
Rear lift per pump gpm
157.8 lb per gpm
New Holland Workmaster 45 Hydraulic Comparison Charts
Pump flow comparison
This model
11.6 gpm
Average
8 gpm
Low
3.5 gpm
High
14 gpm
Rear lift comparison
This model
1,830 lb
Average
1,800 lb
Low
800 lb
High
3,200 lb
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland Workmaster 45 Steering, Brakes & Mechanical Hydraulic Notes
Steering
hydrostatic power
Brakes
mechanical wet disc brakes
Differential lock
mechanical rear differential lock with foot pedal, limited slip front axle (4WD)
New Holland Workmaster 45 Hydraulic Capacity FAQ
Why is the New Holland Workmaster 45 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland Workmaster 45, but pump flow is 11.6 gpm | 43.9 lpm, system type is open center fixed displacement, and lift is listed as 1,830 lbs | 830 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland Workmaster 45 hydraulics feel fast or slow?
The useful speed clue is 11.6 gpm | 43.9 lpm pump flow, above the 8 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What matters most for loader speed on the New Holland Workmaster 45?
On the New Holland Workmaster 45, 11.6 gpm | 43.9 lpm pump flow points to quicker loader and cylinder movement and 1,830 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland Workmaster 45?
For implement matching, the useful checks are 11.6 gpm flow, 1,830 lb listed lift, 1 or 2 remote/valve listing, and 2/1 hitch. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland Workmaster 45 rear lift capacity strong?
The listed lift figure is 1,830 lbs | 830 kg, close to the 1,800 lb benchmark. It is in the normal range, so implement length and ballast matter as much as the headline lift number.
Are the New Holland Workmaster 45 hydraulic remotes enough?
The New Holland Workmaster 45 remote/valve listing is 1 or 2. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the New Holland Workmaster 45 hydraulics handle long hydraulic jobs?
The useful heat clues are 11.6 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the New Holland Workmaster 45 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is 2/1, hitch control is position control, and listed lift is 1,830 lbs | 830 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the New Holland Workmaster 45 use?
The hydraulic system is listed as open center fixed displacement with 11.6 gpm | 43.9 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the New Holland Workmaster 45 hydraulics?
For service planning, the system is listed as open center fixed displacement and flow is listed at 11.6 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
