The Massey Ferguson 5711SL tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 15 gpm | 56.8 lpm, hydraulic pressure is 2900 psi | 200.0 bar, and hydraulic type is open center.
Benchmarks use practical low, average and high ranges for the large ag tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Why is the Massey Ferguson 5711SL hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Massey Ferguson 5711SL, but pump flow is 15 gpm | 56.8 lpm, pressure is 2900 psi | 200.0 bar, system type is open center, and lift is listed as 8575 lbs | 3889 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Massey Ferguson 5711SL hydraulics feel fast or slow?
The useful speed clue is 15 gpm | 56.8 lpm pump flow, below the 50 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the Massey Ferguson 5711SL hydraulic pressure tell you?
The pressure spec is 2900 psi | 200.0 bar, close to the 3,100 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Massey Ferguson 5711SL?
On the Massey Ferguson 5711SL, 15 gpm | 56.8 lpm pump flow points to slower loader and cylinder movement, 2,900 psi pressure affects force more than speed, and 8,575 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 5711SL?
For implement matching, the useful checks are 15 gpm flow, 2,900 psi pressure, 8,575 lb listed lift, and 1 to 4 remote/valve listing. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, normal on pressure for the class, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 5711SL rear lift capacity strong?
The listed lift figure is 8575 lbs | 3889 kg, below the 15,500 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the Massey Ferguson 5711SL hydraulic remotes enough?
The Massey Ferguson 5711SL remote/valve listing is 1 to 4. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Massey Ferguson 5711SL hydraulics handle long hydraulic jobs?
The useful heat clues are 15 gpm flow, 2,900 psi pressure, and about 25.4 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the Massey Ferguson 5711SL make on paper?
Using 2,900 psi and 15 gpm, the rough pressure-flow estimate is about 25.4 hydraulic hp. That is a useful middle-range hydraulic power figure for normal tractor work. It is a comparison number, not engine horsepower.
What do the Massey Ferguson 5711SL hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is III/II, hitch control is lower-link draft sensing, and listed lift is 8575 lbs | 3889 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
