The Massey Ferguson 5612 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 15 gpm | 56.8 lpm, hydraulic pressure is 2900 psi | 200.0 bar, and hydraulic type is open center | open center closed center pressure flow compensated Optional (PFC).
Hydraulic Flow15 gpm | 56.8 lpm
Pressure2900 psi | 200.0 bar
Hydraulic Typeopen center | open center closed center pressure flow compensated Optional (PFC)
about 25.4 hydraulic hp from listed pressure and pump flow
Massey Ferguson 5612 Hydraulic Comparison Charts
Pump flow comparison
This model
15 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Hydraulic pressure comparison
This model
2,900 psi
Average
2,600 psi
Low
2,100 psi
High
3,200 psi
Rear lift comparison
This model
8,575 lb
Average
7,000 lb
Low
3,000 lb
High
12,000 lb
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Why is the Massey Ferguson 5612 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Massey Ferguson 5612, but pump flow is 15 gpm | 56.8 lpm, pressure is 2900 psi | 200.0 bar, system type is open center | open center closed center pressure flow compensated Optional (PFC), and lift is listed as 8575 lbs | 3889 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Massey Ferguson 5612 hydraulics feel fast or slow?
The useful speed clue is 15 gpm | 56.8 lpm pump flow, close to the 14 gpm benchmark for this group. It should be normal for general tractor hydraulic work, assuming the pump and valves are healthy.
What does the Massey Ferguson 5612 hydraulic pressure tell you?
The pressure spec is 2900 psi | 200.0 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Massey Ferguson 5612?
On the Massey Ferguson 5612, 15 gpm | 56.8 lpm pump flow is around normal for loader/cylinder speed, 2,900 psi pressure affects force more than speed, and 8,575 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 5612?
For implement matching, the useful checks are 15 gpm flow, 2,900 psi pressure, 8,575 lb listed lift, and 2 to 4 remote/valve listing. That combination is in the normal flow range for this size group, normal on pressure for the class, and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 5612 rear lift capacity strong?
The listed lift figure is 8575 lbs | 3889 kg, above the 7,000 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Are the Massey Ferguson 5612 hydraulic remotes enough?
The Massey Ferguson 5612 remote/valve listing is 2 to 4. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Massey Ferguson 5612 hydraulics handle long hydraulic jobs?
The useful heat clues are 15 gpm flow, 2,900 psi pressure, and about 25.4 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the Massey Ferguson 5612 make on paper?
Using 2,900 psi and 15 gpm, the rough pressure-flow estimate is about 25.4 hydraulic hp. That is a useful middle-range hydraulic power figure for normal tractor work. It is a comparison number, not engine horsepower.
What do the Massey Ferguson 5612 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II, hitch control is electronic lower link draft control, and listed lift is 8575 lbs | 3889 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
