Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Massey Ferguson 5711SL Horsepower FAQ
How much horsepower does the Massey Ferguson 5711SL have?
The listed engine output is 105 hp, above the 80 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 105 hp.
How much PTO horsepower does the Massey Ferguson 5711SL have?
The listed PTO output is 88 hp, above the 65 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 88 hp.
How much engine power reaches the PTO on the Massey Ferguson 5711SL?
The PTO-to-engine transfer works out to 83.8%, from 105 engine hp to 88 PTO hp. That is a normal usable range for judging PTO implement fit.
How big is the Massey Ferguson 5711SL engine?
The engine displacement is 268.5 ci, close to the 260 ci benchmark average. It is close to the normal engine-size range for this horsepower class.
Is the Massey Ferguson 5711SL engine stressed for its PTO horsepower?
The engine has about 3 cubic inches per PTO hp, using 268.5 ci and 88 PTO hp. That is a smaller-displacement, higher-output style result.
How much PTO horsepower per liter does the Massey Ferguson 5711SL make?
The output density is about 20 PTO hp per liter, using 88 PTO hp and 4.4 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
How much torque does the Massey Ferguson 5711SL have?
The listed torque is 345 lb-ft, above the 240 lb-ft benchmark average. The 345 lb-ft figure is useful for lugging, loader work and heavy PTO load recovery.
Does the Massey Ferguson 5711SL have good torque for its PTO horsepower?
The torque-to-PTO-power figure is about 3.9 lb-ft per PTO hp, using 345 lb-ft and 88 PTO hp. A higher number usually points to a slower, gruntier working feel.
What rpm is the Massey Ferguson 5711SL rated at?
The rated speed is 2,200 rpm, close to the 2,200 rpm benchmark average. The 2,200 rpm figure is around normal for this class.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official masseyferguson.com website before buying parts, sizing implements or making repair decisions.
