The Kubota M6-111 tractor is 82.7 in wide and 111.8 in tall, with a 95.9 in wheelbase.
Width82.7 in (6 ft 10.7 in) / 2,100.6 mm
Height111.8 in (9 ft 3.8 in) / 2,839.7 mm
Wheelbase95.9 in (7 ft 11.9 in) / 2,435.9 mm
Ground clearance19.5 in (1 ft 7.5 in) / 495.3 mm
Kubota M6-111 Dimensions
Overall width
82.7 in (6 ft 10.7 in) / 2,100.6 mm
Overall height
111.8 in (9 ft 3.8 in) / 2,839.7 mm
Wheelbase
95.9 in (7 ft 11.9 in) / 2,435.9 mm
Ground clearance
19.5 in (1 ft 7.5 in) / 495.3 mm
Front tread width
63 in (5 ft 3 in) / 1,600.2 mm
Rear tread width
66.9 in (5 ft 6.9 in) / 1,699.3 mm
Tractor Size Comparison Chart
Overall width comparison
This model
82.7 in
Average
165 in
Low
120 in
High
220 in
Overall height comparison
This model
111.8 in
Average
160 in
Low
125 in
High
220 in
Wheelbase comparison
This model
95.9 in
Average
180 in
Low
130 in
High
260 in
Ground clearance comparison
This model
19.5 in
Average
28 in
Low
18 in
High
45 in
Kubota M6-111 Extra Dimension Notes
Storage fit note
The Kubota M6-111 is not something to squeeze into tight domestic storage. With width 82.7 in (6 ft 10.7 in) / 2,100.6 mm and height 111.8 in (9 ft 3.8 in) / 2,839.7 mm, use machinery-shed expectations.
Fitment note
The Kubota M6-111 gives width at 82.7 in (6 ft 10.7 in) / 2,100.6 mm and height at 111.8 in (9 ft 3.8 in) / 2,839.7 mm. Use those numbers for the shed, trailer and access check.
Wheelbase note
For size comparison, the Kubota M6-111’s 95.9 in (7 ft 11.9 in) / 2,435.9 mm wheelbase is a strong reference point.
Ground clearance note
The Kubota M6-111 has captured ground clearance of 19.5 in (1 ft 7.5 in) / 495.3 mm. More clearance helps in ruts and uneven ground; less clearance can feel more planted.
Tread width note
The Kubota M6-111 has front/rear tread listed at 63 in (5 ft 3 in) / 1,600.2 mm at the front and 66.9 in (5 ft 6.9 in) / 1,699.3 mm at the rear. Compare it with your working setup.
Storage Tips
Leave room around the Kubota M6-111 for mirrors, steps, tires, cab/ROPS and attachments.
Leave walking room around the parked tractor if you need to service, refuel or connect implements indoors.
For this class, doorway width and attachment clearance are major planning numbers.
Use the 95.9 in wheelbase as a clue for how much approach room is needed near the shed entrance.
Overhead clearance should be measured at the lowest part of the doorway, not the tallest part of the shed.
Storage FAQ
What size garage will fit the tractor?
The tractor itself is 82.7 in wide, 111.8 in tall, and 95.9 in wheelbase. For storage, that means the opening should be closer to 14 ft high and 12 ft wide, with about the tractor length plus attachment room of usable depth.
What size door should I check?
Use 14 ft high and 12 ft wide as the door-and-bay target. That is based on the tractor’s 111.8 in height, 82.7 in width and length not captured length, plus working clearance.
Do attachments change the storage size?
Yes. The more the shed fit depends on the exact length not captured length, the more you should remove attachments or choose a deeper bay.
How much maneuvering room should I allow?
Leave turning room outside and walk-around room inside. The tractor is length not captured long, 82.7 in wide, and has a 95.9 in wheelbase, so a tight turn beside posts or fences is the real problem.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official kubotausa.com website for official information.
