The Case IH 495 dimensions found are: length is 136 inches | 345 cm, minimum tread width is 66 inches | 167 cm, height is 93.5 inches | 237 cm, and wheelbase is 79.8 inches | 202 cm.
Length136 inches | 345 cm
Width66 inches | 167 cm
Height93.5 inches | 237 cm
Wheelbase79.8 inches | 202 cm
Case IH 495 Dimensions
Overall length
136 inches | 345 cm
Overall width
Minimum tread width: 66 inches | 167 cm
Overall height
ROPS: 93.5 inches | 237 cm
Wheelbase
79.8 inches | 202 cm
Ground clearance
2WD front axle: 22.1 inches | 56 cm | 4WD front axle: 14 inches | 35 cm
Case IH 495 Weight
Shipping weight
5200 lbs | 2358 kg | 6090 lbs | 2762 kg
Case IH 495 Tire Size Notes
Ag front
6.00-16
Ag rear
14.9-24
Case IH 495 Dimension Comparison Charts
Length comparison
This model
136 in
Average
145 in
Low
120 in
High
175 in
Width comparison
This model
66 in
Average
74 in
Low
60 in
High
90 in
Height comparison
This model
93.5 in
Average
100 in
Low
86 in
High
120 in
Wheelbase comparison
This model
79.8 in
Average
86 in
Low
70 in
High
105 in
Ground clearance comparison
This model
22.1 in
Average
15 in
Low
10 in
High
21 in
Weight comparison
This model
5,200 lbs
Average
5,500 lbs
Low
3,500 lbs
High
8,000 lbs
Floor space footprint
This model
62 sq ft
Average
75 sq ft
Low
50 sq ft
High
110 sq ft
Benchmarks use practical low, average and high dimension ranges for the utility tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Case IH 495 Extra Dimension Notes
Storage and fit note
Using the first listed dimension values, the Case IH 495 is about 136 inches | 345 cm long, about 66 inches | 167 cm wide, and about 93.5 inches | 237 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
Case IH 495 Dimensions FAQ
Is the Case IH 495 a long tractor?
The Case IH 495 has an average listed length at 136 in, which is close to the 145 in benchmark average. It is not unusually short or unusually long for this size class.
Is the Case IH 495 narrow enough for tight storage?
The listed width is middle-of-the-pack at 66 in, which is close to the 74 in benchmark average. It is not especially narrow, but it is not unusually wide either.
Is the Case IH 495 tall for a shed or garage?
The listed height is about normal at 93.5 in, which is close to the 100 in benchmark average. A normal-height result still needs extra clearance for ROPS, cab, exhaust and uneven ground.
How much floor space does the Case IH 495 need?
The bare footprint is about 62 sq ft from a 11.3 ft length and 5.5 ft width. That is below the 75 sq ft benchmark for this category.
Does the Case IH 495 have a short or long wheelbase?
The wheelbase is average for the category at 79.8 in, which is close to the 86 in benchmark average. It sits near the normal benchmark for this tractor size.
Does the Case IH 495 have good ground clearance?
The listed ground clearance is high for the category at 22.1 in, which is above the 15 in benchmark average. It has more underside clearance than the benchmark average.
Is the Case IH 495 heavy for its size?
The listed weight is average for the category at 5,200 lbs, which is close to the 5,500 lbs benchmark average. It sits near the normal benchmark before ballast, loader weight or implements are added.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official caseih.com website before making shed, trailer, garage or transport decisions.
