The Kubota M1-100 coolant capacity is listed as 2.17 gal (8.2 L). It also lists coolant type ethylene glycol-based coolant and ASTM D3306 compatible and antifreeze mix 50/50 coolant and water mix.
Kubota M1-100 Coolant Capacity
| Coolant capacity | 2.17 gal (8.2 L) |
|---|---|
| Cooling system capacity | 2.17 gal (8.2 L) |
| Radiator capacity | 2.17 gal (8.2 L) |
| Coolant type | ethylene glycol-based coolant and ASTM D3306 compatible |
| Antifreeze mix | 50/50 coolant and water mix |
| Engine horsepower | 100 hp (74.6 kW) |
| Engine displacement | 5.4 L (329.5 cu in) |
Coolant Capacity Comparison Chart
Coolant capacity comparison
Engine horsepower comparison
Engine displacement comparison
Kubota M1-100 Coolant and Engine Notes
| Coolant capacity note | The Kubota M1-100’s key coolant figure here is 2.17 gal (8.2 L) for coolant capacity. Use that before buying coolant or draining the system |
|---|---|
| Radiator capacity note | The Kubota M1-100 radiator figure is 2.17 gal (8.2 L). Treat it as radiator context, not always the complete refill amount |
| Coolant type note | The captured coolant type for the Kubota M1-100 is ethylene glycol-based coolant and ASTM D3306 compatible. Do not mix unknown coolant types unless the label and manual say they are compatible |
| Antifreeze mix note | The Kubota M1-100 antifreeze mix is listed as 50/50 coolant and water mix. That is the normal protection range for freezing, boiling and corrosion control |
| Engine context note | For the Kubota M1-100, the supporting engine specs are engine horsepower 100 hp (74.6 kW) and displacement 5.4 L (329.5 cu in). Use them as context beside the coolant capacity, not as a replacement for the manual |
| Refill note | For a coolant change on the Kubota M1-100, do not just dump in coolant and walk away. Fill slowly, run it up to temperature, cool it down and top up as needed |
Kubota M1-100 Coolant Capacity FAQ
What is the Kubota M1-100 coolant capacity?
The Kubota M1-100 coolant capacity is listed as 2.17 gal (8.2 L) for coolant capacity. Use this as the refill planning number and confirm the final level at the radiator or overflow bottle.
Can I use any coolant in the Kubota M1-100?
No. Use ethylene glycol-based coolant and ASTM D3306 compatible or a coolant that clearly matches the manual’s required spec. Wrong coolant can create corrosion, deposits or seal problems.
Is premixed coolant okay for the Kubota M1-100?
Premixed coolant can be fine if it matches ethylene glycol-based coolant and ASTM D3306 compatible and the required mix. The captured mix for the Kubota M1-100 is 50/50 coolant and water mix.
How often should I change coolant in the Kubota M1-100?
The captured coolant change interval for the Kubota M1-100 is the service interval in the operator manual. If service history is unknown, changing it is usually smarter than guessing.
Why does the Kubota M1-100 coolant amount differ from other models?
Coolant capacity changes with engine and radiator setup. For the Kubota M1-100, the supporting engine data is horsepower 100 hp (74.6 kW) and displacement 5.4 L (329.5 cu in).
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
