The Kubota GR2000 deck belt part number found is K5201-71410. The drive belt part number found is K5201-71410. The drive belt size found is 95.5 in (2,426 mm) long by 0.5 in (13 mm) wide.
Kubota GR2000 Belt Size and Part Numbers
| Mower deck belt part number | K5201-71410 |
|---|---|
| Drive belt part number | K5201-71410 |
| Drive belt length | 95.5 in (2,426 mm) |
| Drive belt width | 0.5 in (13 mm) |
| Deck size | 48 in deck |
Belt Size Comparison Chart
Belt length comparison
Belt width comparison
Mower deck size comparison
Kubota GR2000 Belt Notes
| Mower deck belt note | The Kubota GR2000 deck belt part number captured here is K5201-71410. Use the listed value as a buying guide, not a blind substitute for the deck-specific parts diagram |
|---|---|
| Drive belt note | The Kubota GR2000 drive or transmission belt listing shows part number K5201-71410, length 95.5 in (2,426 mm) and width 0.5 in (13 mm). This is separate from the mower deck belt |
| Deck size note | The captured mower deck size for the Kubota GR2000 is 48 in deck. Deck size matters because the same model family can use different belts with different decks |
| Fitment note | The blunt rule with the Kubota GR2000: part number beats guesswork. If the belt is off by even a small amount, it can slip, squeal, jump pulleys or wear fast |
Kubota GR2000 Belt Size FAQ
What should you check when fitting a 95.5 in (2,426 mm) drive belt on the Kubota GR2000?
The drive belt length found is 95.5 in (2,426 mm). This is a longer mower belt run, so twist, idler alignment and the belt keeper positions matter. A belt can be the right length and still fail if it is routed wrong. Also check the idler spring and pulley grooves because drive belts can slip under load even when they look fine at idle
Can you replace the Kubota GR2000 belt with the same length but different width?
The drive belt width found is 0.5 in (13 mm). That is the common 1/2-inch belt width range. Still match the OEM number because the belt angle, fabric wrap and effective length can differ. A belt with the wrong top width can ride too high or too low in the pulley even if the length looks right
What is the fastest way to confirm the Kubota GR2000 deck belt?
Start with the captured 48 in deck deck and the deck belt value K5201-71410. Then check the belt routing decal or parts diagram so you do not order a belt for the wrong deck
What should you double-check with the Kubota GR2000 deck belt part number?
The captured deck belt number is K5201-71410. Because the length and width are missing here, check the old belt label, deck tag or parts diagram before trusting a non-OEM cross-reference
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official kubotausa.com before ordering a replacement belt.
