The Kubota GL19 has a 3-point hitch lift capacity of 1,540 lb (699 kg). It also lists hitch category Category 1, hydraulic pump flow 8.2 gpm (31 L/min), and operating weight 2,249 lb (1,020 kg).
Best rear lift figure1,540 lb (699 kg)
Hitch categoryCategory 1
Operating weight2,249 lb (1,020 kg)
Kubota GL19 3-Point Hitch Lift Capacity
3-point hitch lift capacity
1,540 lb (699 kg)
Hitch category
Category 1
Hydraulic pump flow
8.2 gpm (31 L/min)
Operating weight
2,249 lb (1,020 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
1,540 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Hydraulic pump flow comparison
This model
8.2 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Operating weight comparison
This model
2,249 lb
Average
2,600 lb
Low
1,500 lb
High
4,500 lb
Kubota GL19 Hitch and Rear Lift Notes
Rear lift capacity note
The key hitch number for the Kubota GL19 is 1,540 lb (699 kg) (3-point hitch lift capacity). In plain terms, it is useful for compact implements like box blades, small tillers, rotary cutters, ballast boxes and rear blades
Hydraulic flow note
The Kubota GL19’s captured hydraulic pump flow is 8.2 gpm (31 L/min). Lift capacity is still the main hitch number, but pump flow helps describe hydraulic capability
Operating weight note
The Kubota GL19 operating weight is listed as 2,249 lb (1,020 kg). Tractor weight matters because a machine can sometimes lift more than it should comfortably carry on rough ground
Rear implement matching
Do not buy rear implements by model number alone. Match the Kubota GL19’s lift capacity against gear like box blade, small rotary cutter, tiller, ballast box, and rear blade
Kubota GL19 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota GL19?
Rear lift capacity for the Kubota GL19 is shown as 1,540 lb (699 kg) for 3-point hitch lift capacity. For real attachment matching, stay conservative with heavy attachments and allow margin for implement overhang.
What lift measurement should I compare?
Compare the most conservative rear-lift figure you can find for the Kubota GL19, ideally the 24-inch behind-the-link-ends rating if it is available.
Does hitch category matter on the Kubota GL19?
Yes. The Kubota GL19 is listed as Category 1, and that decides what rear implements physically connect cleanly.
How should I match rear implements to the Kubota GL19?
Start with 1,540 lb (699 kg) for 3-point hitch lift capacity, then compare the actual implement weight and overhang. Typical checks include box blade, small rotary cutter, tiller, ballast box, and rear blade.
Do hydraulic flow and weight matter for the Kubota GL19?
Yes. The Kubota GL19 lists hydraulic pump flow of 8.2 gpm (31 L/min) and operating weight of 2,249 lb (1,020 kg). Lift capacity says what it can raise; flow and weight help describe hydraulic response and stability.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
