The Kubota GL19 coolant capacity is listed as 1.59 gal (6 L). It also lists coolant type ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible and antifreeze mix 50/50 coolant and water mix.
Kubota GL19 Coolant Capacity
| Coolant capacity | 1.59 gal (6 L) |
|---|---|
| Cooling system capacity | 1.59 gal (6 L) |
| Radiator capacity | 1.59 gal (6 L) |
| Coolant type | ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible |
| Antifreeze mix | 50/50 coolant and water mix |
| Engine model | D1403 |
| Engine horsepower | 18.7 hp (13.9 kW) |
| Engine displacement | 1.4 L (85.4 cu in) |
Coolant Capacity Comparison Chart
Coolant capacity comparison
Engine horsepower comparison
Engine displacement comparison
Kubota GL19 Coolant and Engine Notes
| Coolant capacity note | The headline cooling-system number for the Kubota GL19 is 1.59 gal (6 L). Buy enough coolant before opening the drain plug |
|---|---|
| Radiator capacity note | The Kubota GL19 radiator figure is 1.59 gal (6 L). Treat it as radiator context, not always the complete refill amount |
| Coolant type note | For the Kubota GL19, coolant type matters as much as capacity. The clean captured value is ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible |
| Antifreeze mix note | The Kubota GL19 antifreeze mix is listed as 50/50 coolant and water mix. That is the normal protection range for freezing, boiling and corrosion control |
| Engine context note | For the Kubota GL19, the supporting engine specs are engine model D1403, engine horsepower 18.7 hp (13.9 kW), and displacement 1.4 L (85.4 cu in). Use them as context beside the coolant capacity, not as a replacement for the manual |
| Refill note | The practical service move for the Kubota GL19: buy enough coolant for 1.59 gal (6 L), fill to spec, run the engine, then recheck the radiator and overflow bottle after cooling |
Kubota GL19 Coolant Capacity FAQ
How much coolant does the Kubota GL19 take?
The main coolant amount captured for the Kubota GL19 is 1.59 gal (6 L). Buy a little extra so you can top up after the engine warms up and cools down.
Does coolant type matter on the Kubota GL19?
Yes. Capacity tells you how much to buy; coolant type tells you what to buy. For the Kubota GL19, the captured coolant type is ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible.
What antifreeze mix does the Kubota GL19 use?
The captured antifreeze mix for the Kubota GL19 is 50/50 coolant and water mix. A 50/50-style mix is the common practical answer unless your manual or climate calls for something different.
When should the Kubota GL19 coolant be replaced?
Use the service interval in the operator manual as the service guide. Coolant can look okay but still lose corrosion protection over time.
What engine specs affect Kubota GL19 coolant capacity?
The captured engine context is engine model D1403, horsepower 18.7 hp (13.9 kW), and displacement 1.4 L (85.4 cu in). Engine size is one reason coolant capacity changes between tractors.
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
