The Kubota FZ2100 mower blade part number found is 70000-00602. The blade set part number found is K5647-34340. The blade measurement captured is thickness 0.25 in (6 mm). The deck uses 3 blades.
Kubota FZ2100 Mower Blade Size and Part Numbers
| Mower blade part number | 70000-00602 |
|---|---|
| Mower blade set part number | K5647-34340 |
| Blade thickness | 0.25 in (6 mm) |
| Number of blades | 3 blades |
| Blade type | high-lift, mulching, standard, bagging, and 3-in-1 |
Blade Size Comparison Chart
Blade thickness comparison
Kubota FZ2100 Blade Notes
| Blade note | The Kubota FZ2100 blade listing captured here shows single blade part number 70000-00602, blade set part number K5647-34340, and thickness 0.25 in (6 mm). Confirm the number against the deck tag, old blade stamp or official parts diagram before ordering |
|---|---|
| Deck note | For the Kubota FZ2100, the captured deck information is blade count 3 blades. This helps separate 42-inch, 48-inch, 54-inch and larger deck blade setups |
| Blade type note | The blade type captured for the Kubota FZ2100 is high-lift, mulching, standard, bagging, and 3-in-1. High-lift is usually better for bagging, while mulching blades are for chopping clippings finer under a compatible deck |
| Fitment note | Blades are cheap until you buy the wrong set twice. On the Kubota FZ2100, confirm part number, deck size and blade count before buying |
Kubota FZ2100 Mower Blade FAQ
What is the difference between the Kubota FZ2100 blade number and blade set number?
The captured single blade number is 70000-00602, while the captured blade set number is K5647-34340. Use the single blade number for one replacement and the set number when replacing the full deck set
Can you swap Kubota FZ2100 blade types?
The blade type captured is high-lift, mulching, standard, bagging, and 3-in-1. You can often choose a different style only if it fits the same deck and spindle setup. Use 70000-00602 as the fitment starting point
Is the captured Kubota FZ2100 blade part number enough to buy from?
The captured blade part number is 70000-00602. That helps with OEM lookup, but the blade length, width and center hole were not fully captured here. Confirm the deck or old blade before trusting an aftermarket cross-reference
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official kubotausa.com before ordering replacement blades.
