The Kubota FT30 has a 3-point hitch lift capacity of 1,764 lb (800 kg) at 24 inches behind the link ends. It also lists hitch category Category 1, hydraulic pump flow 8.2 gpm (31 L/min), and operating weight 2,469 lb (1,120 kg).
Best rear lift figure1,764 lb (800 kg)
Lift at 24 inches1,764 lb (800 kg)
Hitch categoryCategory 1
Operating weight2,469 lb (1,120 kg)
Kubota FT30 3-Point Hitch Lift Capacity
3-point hitch lift capacity
1,540 lb (699 kg)
Lift capacity at 24 inches behind link ends
1,764 lb (800 kg)
Hitch category
Category 1
Hydraulic pump flow
8.2 gpm (31 L/min)
Operating weight
2,469 lb (1,120 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
1,764 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Lift at 24 inches comparison
This model
1,764 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Hydraulic pump flow comparison
This model
8.2 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Operating weight comparison
This model
2,469 lb
Average
2,600 lb
Low
1,500 lb
High
4,500 lb
Kubota FT30 Hitch and Rear Lift Notes
Rear lift capacity note
The key hitch number for the Kubota FT30 is 1,764 lb (800 kg) (lift at 24 inches behind the link ends). In plain terms, it is useful for compact implements like box blades, small tillers, rotary cutters, ballast boxes and rear blades
24-inch lift note
For the Kubota FT30, the 1,764 lb (800 kg) 24-inch lift spec is the one to use when comparing tillers, blades, mowers, seeders and ballast boxes
Hydraulic flow note
The Kubota FT30’s captured hydraulic pump flow is 8.2 gpm (31 L/min). Lift capacity is still the main hitch number, but pump flow helps describe hydraulic capability
Operating weight note
The Kubota FT30 operating weight is listed as 2,469 lb (1,120 kg). Tractor weight matters because a machine can sometimes lift more than it should comfortably carry on rough ground
Rear implement matching
Do not buy rear implements by model number alone. Match the Kubota FT30’s lift capacity against gear like box blade, small rotary cutter, tiller, ballast box, and rear blade
Kubota FT30 3-Point Hitch FAQ
What is the Kubota FT30 3-point hitch lift capacity?
The Kubota FT30 is listed with 1,764 lb (800 kg) for lift at 24 inches behind the link ends. That makes it a compact rear-lift tractor, so it is useful for compact implements like box blades, small tillers, rotary cutters, ballast boxes and rear blades.
What does the Kubota FT30 24-inch lift capacity mean?
It means the Kubota FT30 is rated to lift 1,764 lb (800 kg) with the load measured 24 inches behind the link ends. That is usually closer to real implement use than a hitch-end-only number.
Can the Kubota FT30 use any rear implement?
No. Start with the Category 1 hitch category, then check implement weight against the 1,764 lb (800 kg) rating at 24 inches behind the link ends.
What rear implements can the Kubota FT30 lift?
Use the 1,764 lb (800 kg) rating at 24 inches behind the link ends as the first filter for implements such as box blade, small rotary cutter, tiller, ballast box, and rear blade. Also check hitch category Category 1 and operating weight 2,469 lb (1,120 kg) before choosing the implement.
Do hydraulic flow and weight matter for the Kubota FT30?
Yes. The Kubota FT30 lists hydraulic pump flow of 8.2 gpm (31 L/min) and operating weight of 2,469 lb (1,120 kg). Lift capacity says what it can raise; flow and weight help describe hydraulic response and stability.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
