The Kubota FT21 has a 3-point hitch lift capacity of 1,200 lb (544 kg) at 24 inches behind the link ends. It also lists hitch category Category 1, hydraulic pump flow 8.2 gpm (31 L/min), and operating weight 2,800 lb (1,270 kg).
Best rear lift figure1,200 lb (544 kg)
Lift at 24 inches1,200 lb (544 kg)
Hitch categoryCategory 1
Operating weight2,800 lb (1,270 kg)
Kubota FT21 3-Point Hitch Lift Capacity
3-point hitch lift capacity
1,540 lb (699 kg)
Lift capacity at 24 inches behind link ends
1,200 lb (544 kg)
Hitch category
Category 1
Hydraulic pump flow
8.2 gpm (31 L/min)
Operating weight
2,800 lb (1,270 kg)
Rear Lift Capacity Comparison Chart
Best rear lift comparison
This model
1,200 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Lift at 24 inches comparison
This model
1,200 lb
Average
1,250 lb
Low
700 lb
High
2,200 lb
Hydraulic pump flow comparison
This model
8.2 gpm
Average
8 gpm
Low
4 gpm
High
14 gpm
Operating weight comparison
This model
2,800 lb
Average
2,600 lb
Low
1,500 lb
High
4,500 lb
Kubota FT21 Hitch and Rear Lift Notes
Rear lift capacity note
The key hitch number for the Kubota FT21 is 1,200 lb (544 kg) (lift at 24 inches behind the link ends). In plain terms, it is useful for compact implements like box blades, small tillers, rotary cutters, ballast boxes and rear blades
24-inch lift note
For the Kubota FT21, the 1,200 lb (544 kg) 24-inch lift spec is the one to use when comparing tillers, blades, mowers, seeders and ballast boxes
Hydraulic flow note
The Kubota FT21’s captured hydraulic pump flow is 8.2 gpm (31 L/min). Lift capacity is still the main hitch number, but pump flow helps describe hydraulic capability
Operating weight note
The Kubota FT21 operating weight is listed as 2,800 lb (1,270 kg). Tractor weight matters because a machine can sometimes lift more than it should comfortably carry on rough ground
Rear implement matching
Do not buy rear implements by model number alone. Match the Kubota FT21’s lift capacity against gear like box blade, small rotary cutter, tiller, ballast box, and rear blade
Kubota FT21 3-Point Hitch FAQ
What is the rear lift capacity of the Kubota FT21?
Rear lift capacity for the Kubota FT21 is shown as 1,200 lb (544 kg) for lift at 24 inches behind the link ends. For real attachment matching, stay conservative with heavy attachments and allow margin for implement overhang.
Is the 24-inch lift rating the one to trust?
For most rear implements, yes. The Kubota FT21 is listed at 1,200 lb (544 kg) at 24 inches behind the link ends, which better reflects weight hanging behind the hitch points.
Does hitch category matter on the Kubota FT21?
Yes. The Kubota FT21 is listed as Category 1, and that decides what rear implements physically connect cleanly.
How should I match rear implements to the Kubota FT21?
Start with 1,200 lb (544 kg) for lift at 24 inches behind the link ends, then compare the actual implement weight and overhang. Typical checks include box blade, small rotary cutter, tiller, ballast box, and rear blade.
Do hydraulic flow and weight matter for the Kubota FT21?
Yes. The Kubota FT21 lists hydraulic pump flow of 8.2 gpm (31 L/min) and operating weight of 2,800 lb (1,270 kg). Lift capacity says what it can raise; flow and weight help describe hydraulic response and stability.
Official information note
Mistakes do happen. Tractor hitch lift specs can change by year, market, tire setup, ballast, hitch option and measurement point. Please check the operator manual, build sheet and official kubotausa.com website for official information before buying or lifting heavy implements.
