The Kubota FT21 coolant capacity is listed as 1.64 gal (6.2 L). It also lists coolant type ethylene glycol-based coolant and ASTM D3306 compatible and antifreeze mix 50/50 coolant and water mix.
Kubota FT21 Coolant Capacity
| Coolant capacity | 1.64 gal (6.2 L) |
|---|---|
| Cooling system capacity | 1.59 gal (6 L) |
| Coolant type | ethylene glycol-based coolant and ASTM D3306 compatible |
| Antifreeze mix | 50/50 coolant and water mix |
| Coolant change interval | every 700 hours |
| Engine model | D1105 |
| Engine horsepower | 21 hp (15.7 kW) |
Coolant Capacity Comparison Chart
Coolant capacity comparison
Engine horsepower comparison
Kubota FT21 Coolant and Engine Notes
| Coolant capacity note | The headline cooling-system number for the Kubota FT21 is 1.64 gal (6.2 L). Buy enough coolant before opening the drain plug |
|---|---|
| Coolant type note | For the Kubota FT21, coolant type matters as much as capacity. The clean captured value is ethylene glycol-based coolant and ASTM D3306 compatible |
| Antifreeze mix note | The Kubota FT21 antifreeze mix is listed as 50/50 coolant and water mix. That is the normal protection range for freezing, boiling and corrosion control |
| Coolant change interval note | For the Kubota FT21, the service interval is listed as every 700 hours. Time matters too, not just engine hours |
| Engine context note | For the Kubota FT21, the supporting engine specs are engine model D1105 and engine horsepower 21 hp (15.7 kW). Use them as context beside the coolant capacity, not as a replacement for the manual |
| Refill note | The practical service move for the Kubota FT21: buy enough coolant for 1.64 gal (6.2 L), fill to spec, run the engine, then recheck the radiator and overflow bottle after cooling |
Kubota FT21 Coolant Capacity FAQ
What is the cooling system capacity of the Kubota FT21?
The Kubota FT21 cooling system capacity is shown as 1.64 gal (6.2 L). That is the number to use before draining the system.
What coolant type should I use in the Kubota FT21?
Use ethylene glycol-based coolant and ASTM D3306 compatible. The blunt rule is simple: match the manual’s coolant spec and do not mix unknown coolant formulas.
Should I use straight water in the Kubota FT21?
Not for normal long-term use. The Kubota FT21 should use 50/50 coolant and water mix or the manual’s specified coolant mix so the system gets corrosion, freeze and boil protection.
Does old coolant matter in the Kubota FT21?
Yes. Old coolant can lose protection even if temperature looks normal. The listed service interval for the Kubota FT21 is every 700 hours.
Why does the Kubota FT21 coolant amount differ from other models?
Coolant capacity changes with engine and radiator setup. For the Kubota FT21, the supporting engine data is engine model D1105 and horsepower 21 hp (15.7 kW).
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
