The John Deere X495 mower blade part number found is M144202. The blade set part numbers found are M144176 and M144177. The blade measurement captured is thickness 0.188 in (5 mm). The deck uses 3 blades.
John Deere X495 Mower Blade Size and Part Numbers
| Mower blade part number | M144202 |
|---|---|
| Mower blade set part number | M144176 and M144177 |
| Blade thickness | 0.188 in (5 mm) |
| Number of blades | 3 blades |
| Blade type | high-lift, mulching, bagging, and 3-in-1 |
Blade Size Comparison Chart
Blade thickness comparison
John Deere X495 Blade Notes
| Blade note | The John Deere X495 blade listing captured here shows single blade part number M144202, blade set part numbers M144176 and M144177, and thickness 0.188 in (5 mm). Use this as a buying guide, then match the blade position, deck size and center-hole style before spending money |
|---|---|
| Deck note | For the John Deere X495, the captured deck information is blade count 3 blades. Match the blades to the fitted deck, not just the tractor model name |
| Blade type note | The John Deere X495 blade style captured here is high-lift, mulching, bagging, and 3-in-1. Blade type affects airflow and clipping handling, not just cut width |
| Fitment note | The blunt rule with the John Deere X495: part number and center hole beat guesswork. A blade can be the right length and still be wrong |
John Deere X495 Mower Blade FAQ
Should you buy one John Deere X495 blade or a full set?
The single blade number captured is M144202, and the set number captured is M144176 and M144177. If one blade is bent from damage, one may be fine; if they are worn down, replacing the full set usually gives a cleaner cut
Can you swap John Deere X495 blade types?
The blade type captured is high-lift, mulching, bagging, and 3-in-1. You can often choose a different style only if it fits the same deck and spindle setup. Use M144202 as the fitment starting point
What should you double-check with the John Deere X495 blade part number?
The captured blade part number is M144202. Because the physical blade measurements are missing here, check the old blade stamp, deck tag or official parts diagram before ordering
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
