The John Deere LA130 mower blade part numbers found are M130642 and M130643. The blade set part numbers found are M144176 and M144177. The blade measurement captured is thickness 0.203 in (5 mm). The deck uses 2 blades.
Blade part #M130642 and M130643
Blade set part #M144176 and M144177
Blade sizethickness 0.203 in (5 mm)
Blade count2 blades
John Deere LA130 Mower Blade Size and Part Numbers
Mower blade part number
M130642 and M130643
Mower blade set part number
M144176 and M144177
Blade thickness
0.203 in (5 mm)
Number of blades
2 blades
Blade type
high-lift and mulching
Blade Size Comparison Chart
Blade thickness comparison
This model
0.203 in
Average
0.188 in
Low
0.125 in
High
0.25 in
John Deere LA130 Blade Notes
Blade note
The John Deere LA130 blade listing captured here shows single blade part numbers M130642 and M130643, blade set part numbers M144176 and M144177, and thickness 0.203 in (5 mm). Use this as a buying guide, then match the blade position, deck size and center-hole style before spending money
Deck note
For the John Deere LA130, the captured deck information is blade count 2 blades. Match the blades to the fitted deck, not just the tractor model name
Blade type note
The John Deere LA130 blade style captured here is high-lift and mulching. Blade type affects airflow and clipping handling, not just cut width
Fitment note
Blades are cheap until you buy the wrong set twice. On the John Deere LA130, confirm part number, deck size and blade count before buying
John Deere LA130 Mower Blade FAQ
What is the difference between the John Deere LA130 blade number and blade set number?
The captured single blade number is M130642 and M130643, while the captured blade set number is M144176 and M144177. Use the single blade number for one replacement and the set number when replacing the full deck set
Which blade type should you use on the John Deere LA130?
The blade type captured is high-lift and mulching. Use that against the captured fitment value M130642 and M130643. High-lift helps bagging/discharge; mulching blades need the right mulching setup
Is the captured John Deere LA130 blade part numbers enough to buy from?
The captured blade part numbers is M130642 and M130643. That helps with OEM lookup, but the blade length, width and center hole were not fully captured here. Confirm the deck or old blade before trusting an aftermarket cross-reference
Official information note
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
