The John Deere X475 mower blade part number found is M144202. The blade set part number found is M143520. The blade measurement captured is thickness 0.5 in (13 mm) and center hole 1 in (25 mm).
Blade part #M144202
Blade set part #M143520
Blade sizethickness 0.5 in (13 mm) and center hole 1 in (25 mm)
John Deere X475 Mower Blade Size and Part Numbers
Mower blade part number
M144202
Mower blade set part number
M143520
Blade thickness
0.5 in (13 mm)
Blade center hole size
1 in (25 mm)
Blade Size Comparison Chart
Blade thickness comparison
This model
0.5 in
Average
0.25 in
Low
0.188 in
High
0.312 in
John Deere X475 Blade Notes
Blade note
The John Deere X475 blade listing captured here shows single blade part number M144202, blade set part number M143520, and thickness 0.5 in (13 mm) and center hole 1 in (25 mm). Confirm the number against the deck tag, old blade stamp or official parts diagram before ordering
Fitment note
For the John Deere X475, use the listed specs as a buying guide, but confirm against the operator manual, parts diagram or old blade before ordering
John Deere X475 Mower Blade FAQ
Can you modify a John Deere X475 blade center hole to fit?
Do not do that. The captured center-hole detail is 1 in (25 mm). Grinding or drilling a mower blade can ruin balance and create vibration
Should you buy one John Deere X475 blade or a full set?
The single blade number captured is M144202, and the set number captured is M143520. If one blade is bent from damage, one may be fine; if they are worn down, replacing the full set usually gives a cleaner cut
Official information note
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
