John Deere X305R Coolant Capacity

Quick answer:

The John Deere X305R takes 1.4 gal (5.3 L) of coolant. After refilling, run the engine, let it cool and confirm the final level.

Coolant capacity1.4 gal (5.3 L)Cooling system refill amount

John Deere X305R Coolant Capacity Specs

Coolant capacity 1.4 gal (5.3 L)
Engine model John Deere X305R tractor features a 12.2 kW
Engine horsepower 16.4 hp
Engine displacement 7.6 L (463.8 cu in)

John Deere X305R Coolant Capacity Guide

Coolant capacity guide

This model

1.4 gal

Class low

0.5 gal

Class typical

2.5 gal

Class high

4.5 gal

Compared with a broad ztrak / mower guide, not the full tractor dataset.

John Deere X305R Coolant Service Notes

Coolant capacity note The useful service number here is 1.4 gal (5.3 L). Keep some extra coolant available because trapped air can lower the level after the first warm-up
Coolant service note Use 1.4 gal (5.3 L) as the refill guide for the John Deere X305R. The final level should still be confirmed at the radiator or overflow bottle
Refill check Use the 1.4 gal (5.3 L) capacity to buy enough coolant for the John Deere X305R, but finish the job by checking the actual level marks
Engine context The John Deere X305R engine specs listed with this page are engine model John Deere X305R tractor features a 12.2 kW, engine horsepower 16.4 hp, and engine displacement 7.6 L (463.8 cu in). They help identify the machine, but they are not a substitute for the coolant capacity

John Deere X305R Coolant Capacity FAQ

How much coolant should I buy for the John Deere X305R?

Use 1.4 gal (5.3 L) as the coolant-change amount for the John Deere X305R. The final level should still be checked at the radiator or overflow bottle

Do I fill the John Deere X305R exactly to capacity or check the level marks?

The 1.4 gal (5.3 L) number helps you plan the refill. The actual finish point is the correct level mark after warm-up, cool-down and leak checking

Can I just add coolant to the John Deere X305R if the level is low?

For the John Deere X305R, use the 1.4 gal (5.3 L) capacity when planning a full drain or flush. Topping up only solves low level, not worn-out coolant

Official information note

Mistakes do happen. Tractor coolant capacity and coolant type can change by year, market, engine, radiator setup and service procedure. Check the operator manual, service manual and official deere.com website before draining, flushing or refilling the cooling system.