The John Deere X300 tractor hydraulic pump flow is 30 GPM, and hydraulic system pressure is 2,000 psi.
Hydraulic pump flow30 GPM
Implement flow30 GPM
Total hydraulic flow3.5 GPM
Hydraulic pressure2,000 psi
Hydraulic system typeclosed-center pressure-flow compensated
Hydraulic fluid capacity5 qt (1.2 gal)
John Deere X300 Hydraulic Flow Details
Hydraulic pump flow
30 GPM
Implement hydraulic flow
30 GPM
Total hydraulic flow
3.5 GPM
Hydraulic system pressure
2,000 psi
Hydraulic system type
closed-center pressure-flow compensated
Hydraulic fluid capacity
5 qt (1.2 gal)
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
30 GPM
Average
13.4 GPM
Low
0.9 GPM
High
85 GPM
Implement hydraulic flow comparison
This model
30 GPM
Average
11.1 GPM
Low
0.9 GPM
High
78 GPM
Total hydraulic flow comparison
This model
3.5 GPM
Average
13 GPM
Low
0.9 GPM
High
78 GPM
Hydraulic pressure comparison
This model
2,000 psi
Average
1,813.3 psi
Low
300 psi
High
3,000 psi
Hydraulic fluid capacity comparison
This model
1.2 gal
Average
3.6 gal
Low
0.5 gal
High
60 gal
John Deere X300 Extra Hydraulic Notes
Hydraulic flow note
With about 30 GPM implement flow, the John Deere X300 sits in the high-flow row-crop hydraulic range and is best suited to multiple SCVs, larger implements and heavier hydraulic demand.
Hydraulic pressure note
At 2,000 psi, the John Deere X300’s hydraulic system pressure matters most for lift force, cylinder force and loader response.
For hydraulic implements, match the implement to the available hydraulic flow (30 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
System type matters on the John Deere X300: closed-center pressure-flow compensated affects how hydraulic flow and pressure are delivered to valves and implements.
Hydraulic fluid capacity note
Hydraulic fluid capacity on the John Deere X300 is 5 qt (1.2 gal), but the correct oil type and fill/check procedure should still come from the official manual.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
