John Deere X300 Dimensions, Length, Width & Height

Quick answer:

The John Deere X300 is 38.2 in wide and 42.9 in tall.

Width38.2 in (3 ft 2.2 in) / 970.3 mm
Height42.9 in (3 ft 6.9 in) / 1,089.7 mm

John Deere X300 Dimensions

Overall width 38.2 in (3 ft 2.2 in) / 970.3 mm
Overall height 42.9 in (3 ft 6.9 in) / 1,089.7 mm
Rear tread width 20 in (1 ft 8 in) / 508 mm

Tractor Size Comparison Chart

Overall width comparison

This model

38.2 in

Average

70 in

Low

20 in

High

176 in

Overall height comparison

This model

42.9 in

Average

79.8 in

Low

36 in

High

156 in

John Deere X300 Extra Dimension Notes

Storage fit note For indoor storage, the John Deere X300 is plausible in smaller spaces. With width 38.2 in (3 ft 2.2 in) / 970.3 mm and height 42.9 in (3 ft 6.9 in) / 1,089.7 mm, confirm height first.
Fitment note The captured size specs for the John Deere X300 are width at 38.2 in (3 ft 2.2 in) / 970.3 mm and height at 42.9 in (3 ft 6.9 in) / 1,089.7 mm. That is enough to make a first-pass storage or transport call.
Tread width note The John Deere X300 rear tread width comes through as 20 in (1 ft 8 in) / 508 mm. Check front tread separately if row spacing matters.

Storage Tips

  • The John Deere X300 is one of the easier tractor sizes to store, but a loader, mower deck or canopy can quickly change the fit.
  • A straight approach into the bay matters more as tractor width and wheelbase increase.

Storage FAQ

Will it fit in a garage?

If the tractor is stored bare, compare your garage to length not captured long, 38.2 in wide and 42.9 in tall. If you want normal parking room, use around 7 ft high and 8 ft wide instead.

What size door should I check?

If there are posts, tracks or stored gear near the doorway, go bigger than 7 ft by 8 ft. The tractor’s base size is length not captured long and 38.2 in wide before attachments.

Do attachments change the storage size?

Yes. The John Deere X300’s 38.2 in width and 42.9 in height are the starting point, but a mower deck can increase width and a loader or rear implement can increase length.

How much maneuvering room should I allow?

Because the John Deere X300 is length not captured long and 38.2 in wide, do not plan on turning sharply at the doorway. Leave about a clear straight approach before the doorway to line up before entering.

Official information note

Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.