The John Deere LX279 tractor hydraulic pump flow is 12.5 GPM, and hydraulic system pressure is 790 psi.
Hydraulic pump flow12.5 GPM
Implement flow3.3 GPM
Total hydraulic flow3.3 GPM
Hydraulic pressure790 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity2.5 gal
John Deere LX279 Hydraulic Flow Details
Hydraulic pump flow
12.5 GPM
Implement hydraulic flow
3.3 GPM
Total hydraulic flow
3.3 GPM
Hydraulic system pressure
790 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
2.5 gal
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
12.5 GPM
Average
13.4 GPM
Low
0.9 GPM
High
85 GPM
Implement hydraulic flow comparison
This model
3.3 GPM
Average
11.1 GPM
Low
0.9 GPM
High
78 GPM
Total hydraulic flow comparison
This model
3.3 GPM
Average
13 GPM
Low
0.9 GPM
High
78 GPM
Hydraulic pressure comparison
This model
790 psi
Average
1,813.3 psi
Low
300 psi
High
3,000 psi
Hydraulic fluid capacity comparison
This model
2.5 gal
Average
3.6 gal
Low
0.5 gal
High
60 gal
John Deere LX279 Extra Hydraulic Notes
Hydraulic flow note
For hydraulic work, the key number on the John Deere LX279 is 3.3 GPM implement flow; that points toward basic lift and light hydraulic functions, not demanding hydraulic motors.
Hydraulic pressure note
The John Deere LX279’s hydraulic pressure is listed at 790 psi, which is lower-pressure; flow still decides attachment speed while pressure affects force.
Rear remotes / SCV note
Rear remotes / SCVs are mentioned, but the exact count is not clearly confirmed in the scraped data.
For hydraulic implements, match the implement to the available hydraulic flow (3.3 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
The John Deere LX279’s hydraulic system type is open-center, which is simple and common on many compact and utility tractors.
Hydraulic fluid capacity note
The John Deere LX279’s hydraulic fluid capacity is listed as 2.5 gal; check the operator manual before servicing because capacity can change with transmission, hydraulic options and market.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
