Weight summary
The published New Holland Workmaster 75 weight is 5,059–5,790 lb (2,294–2,626 kg). The primary figure used for comparisons is 5,790 lb (2,626 kg), listed as 4WD Operating. The published configurations span 731 lb, a 14.4% difference from the lightest listed setup.
How this weight compares
Utility Tractor peers · 1,294 tractors in the benchmark.
Average
Low and high use the 10th and 90th percentiles of the peer group, which keeps one unusually light or heavy tractor from distorting the scale. Average is the peer-group mean.
Tractor profile
Model information
| Manufacturer | New Holland |
|---|---|
| Model | Workmaster 75 |
| Category | Farm tractor |
| Model years | 2010 – 2014 |
| Tractor type | Utility Tractor |
| Published weight variants | 3 |
Weight variants
Shipping, operating, ballasted and drivetrain/configuration weights are kept separate when the source publishes them separately.
| Weight type | Configuration | Weight | Metric | US tons | Variant / note |
|---|---|---|---|---|---|
| 2WD Shipping | — | 5,059 lb | 2,294 kg | 2.53 | — |
| 4WD Shipping | — | 5,688 lb | 2,580 kg | 2.84 | — |
| 4WD Operating | — | 5,790 lb | 2,626 kg | 2.9 | — |
How configuration changes the weight
Technical details
Dimensions
Power & weight ratios
Transport snapshot
Weight context
Tractors with similar weight
Useful reference points from the same dataset.
Closest by published weight
- John Deere 1950 (5798 lb)
- John Deere 2535 (5800 lb)
- John Deere 60 (5800 lb)
- Kubota M4950 (5800 lb)
- Case IH Farmall 65C (5776 lb)
Closest comparable tractors
- John Deere 1950 (5798 lb)
- Case IH Farmall 75C (5776 lb, 76 hp)
- New Holland T4030 (5776 lb, 76 hp)
- Ford 6600 (5880 lb, 75.5 hp)
- Ford 5900 (5760 lb, 73 hp)
New Holland Workmaster 75 weight FAQ
How much does a New Holland Workmaster 75 weigh?
The New Holland Workmaster 75 weighs 5,790 lb (2,626 kg) using the published 4WD Operating figure. Across the published configurations on this page, weight ranges from 5,059 to 5,790 lb (2,294 to 2,626 kg).
How much heavier is the 4WD New Holland Workmaster 75 than the 2WD model?
Published 2WD weight is 5,059 lb (2,295 kg), while published 4WD weight is 5,688–5,790 lb (2,580–2,626 kg). On a midpoint basis, the published 4WD configurations are about 680 lb heavier. Tires, transmission and other configuration differences can also affect the number.
What is the operating weight of the New Holland Workmaster 75 compared with shipping weight?
Published operating weight is 5,790 lb (2,626 kg), versus 5,059–5,688 lb (2,295–2,580 kg) for shipping weight. That is roughly 731 lb (14.4%) more than shipping weight. Operating weight is generally the more useful starting point when estimating a ready-to-use tractor.
Is the New Holland Workmaster 75 heavy or light for a utility tractor?
It is close to average for its peer group. The representative figure sits at about the 63rd percentile, near the middle of the utility tractor peers. That puts it in the average range for this comparison. It is 527 lb heavier than the peer-group average of 5,263 lb.
How wide is the New Holland Workmaster 75 for transport?
The maximum published tractor width is 78.4 in (6.5 ft). That is 23.6 in under 8.5 ft before allowing for a loader, duals, implements or other equipment that may increase transport width.
What is the New Holland Workmaster 75 weight-to-horsepower ratio?
Using the page’s representative 5,790 lb weight and 75 hp power figure, the tractor carries about 77.2 lb per horsepower. A lower lb/hp number means less tractor mass for each horsepower; this is a comparison metric, not a traction or performance rating.

