The John Deere LX255 is in tractor territory for storage, access and transport. It is worth checking the listed measurements against your shed, gate, trailer and storage space.
Storage fit note
The John Deere LX255 storage fit depends on the missing dimensions. With the listed size figures are the main storage check, measure the shed, gate and trailer before assuming fit.
Wheelbase note
The John Deere LX255 wheelbase spec is 48 in (4 ft 0 in) / 1,219.2 mm. Compare it with the overall length to understand front and rear overhang.
Ground clearance note
Ground clearance for the John Deere LX255 is 3.5 in / 88.9 mm. That is the number to check if the tractor will work around rows, rough paddocks or raised ground.
Tread width note
The John Deere LX255 tread dimensions are 15 in (1 ft 3 in) / 381 mm at the front and 20 in (1 ft 8 in) / 508 mm at the rear. This is the wheel-position part of the size story.
Storage Tips
The John Deere LX255 storage fit depends on the missing dimensions, so measure height, width and bay depth directly.
Use the captured specs as a guide, then measure the actual tractor.
Longer wheelbase machines are easier to store when the door approach is straight and uncluttered.
Storage FAQ
Will it fit in a garage?
If your garage door is close to height not captured tall or width not captured wide, count it as too tight. The safer check for the John Deere LX255 is around a measured opening with spare clearance on every side.
What size door should I check?
The clean check is the tractor height plus clearance high, the tractor width plus side clearance wide and the tractor length plus attachment room deep. That gives margin over the listed height not captured height, width not captured width and length not captured length.
Do attachments change the storage size?
Yes. The published length not captured length is useful for the bare tractor, but the real storage number is the longest point from front attachment to rear attachment.
How much maneuvering room should I allow?
Use the 48 in wheelbase as the handling clue. If the approach is angled, a the tractor width plus side clearance door may still feel tight, so leave about 9 ft to straighten up.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
