The John Deere E150 is 20 in wide, with a 48.9 in wheelbase.
Width20 in (1 ft 8 in) / 508 mm
Wheelbase48.9 in (4 ft 0.9 in) / 1,242.1 mm
John Deere E150 Dimensions
Overall width
20 in (1 ft 8 in) / 508 mm
Wheelbase
48.9 in (4 ft 0.9 in) / 1,242.1 mm
Rear tread width
20 in (1 ft 8 in) / 508 mm
Tractor Size Comparison Chart
Overall width comparison
This model
20 in
Average
64.6 in
Low
20 in
High
144 in
Wheelbase comparison
This model
48.9 in
Average
79.2 in
Low
34.8 in
High
190.5 in
John Deere E150 Extra Dimension Notes
Storage fit note
The John Deere E150 may be garage-friendly in some setups, but only after checking the actual door height and width. With width 20 in (1 ft 8 in) / 508 mm, measure before assuming fit.
Fitment note
For the John Deere E150, the fitment call starts with width at 20 in (1 ft 8 in) / 508 mm. Everything else is secondary.
Wheelbase note
The John Deere E150 uses a 48.9 in (4 ft 0.9 in) / 1,242.1 mm wheelbase. This is a practical number for trailer and shed planning.
Tread width note
The John Deere E150 rear tread-width data shows 20 in (1 ft 8 in) / 508 mm. That still helps with stance and row-spacing checks.
Storage Tips
Garage-style storage may work, but judge it against 8 ft wide, not the exact tractor dimensions.
A straight approach into the bay matters more as tractor width and wheelbase increase.
Expect large shed requirements, especially with duals, tracks or implements fitted.
The 48.9 in wheelbase is useful when judging trailer position and shed maneuvering room.
Storage FAQ
Will it fit in a garage?
Do not judge it by floor length alone. This tractor is length not captured long, 20 in wide and height not captured tall, so the garage check needs height, width and depth clearance together: about 8 ft wide.
What size door should I check?
For this very large farm tractor, check the narrowest real opening. A doorway close to 20 in wide or height not captured tall is not enough; aim for roughly 8 ft wide.
Do attachments change the storage size?
Yes. The bare tractor is length not captured long, 20 in wide and height not captured tall; a loader, mower deck, ballast box or rear implement can push the parked size past those numbers.
How much maneuvering room should I allow?
If attachments stay fitted, maneuvering room must be based on the attached length, not just the length not captured bare tractor length and 48.9 in wheelbase.
Official information note
Mistakes do happen. Tractor dimensions can change by year, tire setup, cab/ROPS setup, attachments and market. Please check the operator manual, build sheet and official deere.com website for official information.
