The John Deere L130 tractor hydraulic pump flow is 3.5 GPM, and hydraulic system pressure is 1,500 psi.
Hydraulic pump flow3.5 GPM
Implement flow3.5 GPM
Total hydraulic flow6.5 GPM
Hydraulic pressure1,500 psi
Hydraulic system typeopen-center
Hydraulic fluid capacity2.4 qt (0.6 gal)
John Deere L130 Hydraulic Flow Details
Hydraulic pump flow
3.5 GPM
Implement hydraulic flow
3.5 GPM
Total hydraulic flow
6.5 GPM
Hydraulic system pressure
1,500 psi
Hydraulic system type
open-center
Hydraulic fluid capacity
2.4 qt (0.6 gal)
Hydraulic Flow Comparison Chart
Hydraulic pump flow comparison
This model
3.5 GPM
Average
13.4 GPM
Low
0.9 GPM
High
85 GPM
Implement hydraulic flow comparison
This model
3.5 GPM
Average
11.1 GPM
Low
0.9 GPM
High
78 GPM
Total hydraulic flow comparison
This model
6.5 GPM
Average
13 GPM
Low
0.9 GPM
High
78 GPM
Hydraulic pressure comparison
This model
1,500 psi
Average
1,813.3 psi
Low
300 psi
High
3,000 psi
Hydraulic fluid capacity comparison
This model
0.6 gal
Average
3.6 gal
Low
0.5 gal
High
60 gal
John Deere L130 Extra Hydraulic Notes
Hydraulic flow note
The John Deere L130’s total flow is higher than implement flow, so use the implement-flow number when matching hydraulic tools and SCV-driven equipment.
Hydraulic pressure note
Hydraulic pressure on the John Deere L130 is 1,500 psi, but hydraulic performance depends on pressure and flow together.
Rear remotes / SCV note
Rear remotes / SCVs depend on the tractor’s hydraulic package and options.
For hydraulic implements, match the implement to the available hydraulic flow (3.5 GPM), not just the number of remotes.
Check the operator manual or hydraulic package because SCV count can change by year, market and trim package.
Hydraulic system type note
System type matters on the John Deere L130: open-center affects how hydraulic flow and pressure are delivered to valves and implements.
Hydraulic fluid capacity note
The John Deere L130’s hydraulic fluid capacity is listed as 2.4 qt (0.6 gal); check the operator manual before servicing because capacity can change with transmission, hydraulic options and market.
Official information note
Mistakes do happen. Hydraulic flow, pump flow, implement flow, pressure, rear remote / SCV setup and fluid capacity can change by year, market, transmission, pump option, loader package and hydraulic package. Please check the operator manual and official deere.com website for official information.
