The John Deere L130 deck belt part number found is M144202. The deck belt length found is 48 in (1,219 mm). The drive belt part number found is GX20072. The drive belt length found is 92 in (2,337 mm).
John Deere L130 Belt Size and Part Numbers
| Mower deck belt part number | M144202 |
|---|---|
| Mower deck belt length | 48 in (1,219 mm) |
| Drive belt part number | GX20072 |
| Drive belt length | 92 in (2,337 mm) |
Belt Size Comparison Chart
Belt length comparison
John Deere L130 Belt Notes
| Mower deck belt note | The John Deere L130 deck belt listing shows part number M144202 with length 48 in (1,219 mm). Confirm the belt against the deck tag, belt decal or parts diagram before ordering |
|---|---|
| Drive belt note | The John Deere L130 drive or transmission belt listing shows part number GX20072 with length 92 in (2,337 mm). Treat it as partial drive-belt data if no matching width or OEM part number is shown |
| Fitment note | Belts are cheap until you buy the wrong one twice. On the John Deere L130, confirm belt route, old belt label and OEM part number before ordering |
John Deere L130 Belt Size FAQ
What should you watch when fitting a 48 in (1,219 mm) deck belt on the John Deere L130?
A 48 in (1,219 mm) deck belt leaves little room for sloppy routing. This is a short belt run, so a small routing mistake or wrong pulley side can show up quickly as slipping, rubbing or poor engagement. Before blaming the new belt, compare the belt path to the routing decal and make sure it sits on the correct side of each keeper
How do you avoid mixing up the John Deere L130 deck and drive belts?
Use the belt position first: deck belt part number M144202 and drive belt part number GX20072. A deck belt number does not automatically fit the drive system, even when an aftermarket listing makes the cross-reference look close
Is the captured John Deere L130 deck belt part number enough to buy from?
The captured deck belt number is M144202. This number helps with OEM lookup, but the deck belt width was not fully captured here. Before buying aftermarket, confirm the exact deck or serial range
What is the risk with the John Deere L130 drive belt part number?
The captured drive belt number is GX20072. If the width is missing, a cheap cross-reference can still be wrong even when it claims to replace the OEM belt
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official John Deere parts catalog before ordering a replacement belt.
